开云体育

Nope, Borland Pascal, then Delphi. It is possible to break the linker in Borland Pascal. Harvey

Pointers are relatively easy, if you can get the idea that it's a "look over here" kind of thing.? Given that, you can say "look over here and get me what's there" and then "here" when something

Yeah, I completely understand that. DaveD KC0WJN Thanks for all the fish. ============================== All spelling mistakes are the responsibilty of the reader (Rick Renz, STK, ca. 1994)

PS - I didn't run into EMACS until I was transferred to STK in CO in 1991. DaveD KC0WJN Thanks for all the fish. ============================== All spelling mistakes are the responsibilty of the

Sheesh. TECO. You are hurting my brain. We had PDP-7s at the first engineering company at which I worked in '77. Advanced Electronics Development. We designed and built prototypes of various machines

We have Novas at LSSM as well, 1200s, 3s, and 4s, though they're not (yet) functional. And a Tek 4014 (large CRT version), very nearly functional but still has some issues. -Dave -- Dave McGuire,

Like anything else it become

Pascal? Did you ever write code in Niklaus Wirth's Modula-2? DaveD KC0WJN Thanks for all the fish. ============================== All spelling mistakes are the responsibilty of the reader (Rick Renz,

I have gvim on my Windows box and use it regularly to edit code (EZNEC, Octave and MatLab files, mostly). At first (1980s) I thought vi was primitive. But over the years I realized that it's

CONV mode is the only functional mode, i get blooming at almost any intensity / persistence setting in storage mode unless its so low its basically OFF. [email protected]> wrote:

Yes, 16715-61601 is correct.? It's also listed in the 16800 Series Service Guide. The one William linked to on ebay is the right one.? The cables don't have that part number on them, so you have

Beware of using the 141T in "Conv" mode, you cannot see if the intensity is set too high & causing damaging the storage mesh. You need to start with it in storage mode and turn intensity down to stop

10 MB drives the size of small washing machines, 2MB slide in cartridges that everyone had.? Set 22 (in octal) on the front panel switches to make it boot from the hard drive. Someone reworked the DG

pico? Do tell. DaveD KC0WJN Thanks for all the fish. ============================== All spelling mistakes are the responsibilty of the reader (Rick Renz, STK, ca. 1994) ==============================

Thank you Jeff! This thread has been fantastic.? Some of it went over my head, but all of you are valuable resources for someone like me trying to dive further into this field.? Getting into

Was there an emacs implementation on the PDP-7? Its early history is a bit murky, but I was pretty sure it first existed on a PDP-10 as a set of macros for TECO. There was no PDP-11/32, you must mean

"ESC is your friend". :) DaveD KC0WJN Thanks for all the fish. ============================== All spelling mistakes are the responsibilty of the reader (Rick Renz, STK, ca. 1994)

PDP-7s , actually. I remember DEC minicomputers (7s, 8s, 10s, 11s, VAX, RSX11M, RSTS/E, RT-11) with great affection. I used to moonlight in the early 1980s with another guy from FIT to setup DEC

It is rather silly. Unless the user is using Pico, of course. ;) But when one spends all day using it, and sometimes all night too, well.. -Dave -- Dave McGuire, AK4HZ New Kensington, PA

The acquisition card is a 32 channel 16912 so I think I need a 16715-61601 cable with a 60 pin connector one end to 2 off 40 pin connectors