CONV mode is the only functional mode, i get blooming at almost any intensity / persistence setting in storage mode unless its so low its basically OFF.? ? ? ??
Beware of using the 141T in "Conv" mode, you cannot see if the intensity is set too high & causing damaging the storage mesh. You need to start with it in storage mode and turn intensity down to stop the blooming, then switch to "Conv", if there is any blooming, the intensity is set too high, do not increase the intensity once in "Conv" mode.
?
Attached are the numerous warnings in the 1973 manual and the label that is attached to the cover of my 141T.
?
David
