开云体育

Joe, drop me a private post. If you can wait 3+ weeks until I can access my lab. Ill look to see if I have any AVANTEK GPDs of the correct spec. Ill send you one free if I do....Im really not certain

Anyone knows how to get at decent price a working order 22 or 26.5 GHz 10 dB glass replacement pad (so-called "Attenuation Card"), that's found in the 70 dB A9 input step attenuator of my 8562A SA?

Hi Ian, many thanks for the warm welcome. Now it's over with being incognito ;-) I'm trying to get into the high GHz field using high notch second hand HP equipment. Here's my complete HP inventory

Hi Rastro, many thanks for the very informative links! From what I can tell, the Weinschel attenuators are mechanically absolutely identical with the HP ones, either one builts in license from the

Many thanks for helping me on the syntax. Works great! Somehow, I thought nothing ought to follow the question mark...

Hi Gary, I had a similar problem with a HP5335A counter. What I did was to design a circuit board and place 10 series resistors on it, each 15 ohm, 0.25 W. These resistors were placed in series with

Bonjour ChristianMerci beaucoup pour le manual et journal.CordialementSteve To: hp_agilent_equipment@... Sent: Thursday, February 25, 2016 8:28 AM Subject: Re: [hp_agilent_equipment] HP

A bit late but if you didn't find yet here's one: http://dl.free.fr/tauFCGR4Z A the related HP Journal: http://dl.free.fr/sjZdeZev4 Link is valid on a 30 days since last download basis. Later just

Yes, I asking for 3 samples and few days later was contacted by guy from France, company representing them for Europe. Typical story, what's project, annual prevision....and at end he come with small

Ok that makes more sense! Thanks Chuck. Gary K4FMX _____ From: hp_agilent_equipment@... [mailto:hp_agilent_equipment@...] Sent: Wednesday, February 24, 2016 11:19 PM To:

[hp_agilent_equipment] <hp_agilent_equipment@...> wrote: But there is. By coincidence I just installed the 16700 native config and IA files on a 16700B for an E2423A SCSI Bus Preprocessor.

Oh, one thing I didn't make clear, you have to remove the panel circuit board from the panel bezel and overlay. You do not have to, nor should you, remove the key tops from the switches. -Chuck Harris

Hi Gary, What I do is remove the front panel from the instrument, and set it on a pan to catch the drippings. Then I take a little pump sprayer, like is used for windex, and liberally hose down the

Thanks a lot! 2016-02-25 0:42 GMT-03:00 brunonorth@... [hp_agilent_equipment] < hp_agilent_equipment@...>:

Unfortunately the SimmConn kits are not designed to replace the 8753D/E displays.

Back in the day when I worked on a LOT of these 8555A's, I considered making a small digital voltmeter to emulate the digital readout in the 8445 Preselector: It reads a gated voltage from the

Thanks, that would be great to have the E2423A files online. That's a bit of sad news that they don't work with 16700. Though it justifies keeping a 16500 around.

I have an HP3326A with a very noisy fan. It doesn't sound like the motor has bad bearings or anything else. Just lots of air noise. It is a lot louder than other HP gear that I have. Is there any cure

I had the opposite problem. I had the disk but not the adapter. But they pop up often on eBay without the software. I wish there was a 16700 port of that software. Anyway, I'll try to pull it off my