开云体育

I did of course Andrew, you are right. I was not well awake decidedly this morning!

(32 threads / inch) * (1 in / 25.4mm) = 1.2598 threads / mm 1/1.2598 = 0.79375 mm / thread (pitch) That's not even CLOSE to 0.6mm pitch (42 / 25.4) = 1.65354 threads / mm 1/1.65354 = 0.6048 pitch I

Sorry I got myself confused between the two systems! It's of course 5 micrometers so one large hair thickness! I kick myself...

Indeed in metric land 3.5x0.6 exists. If one calculates the diameter and pitch in mm of your 6-32 one gets: 3.505x0.605 which is just one micrometer too much or one fifth of your hair thickness... In

Radu Bogdan Dicher <vondicher@...> added the photo album Microscope ( /g/HP-Agilent-Keysight-equipment/album?id=301362 )

To assist with feedback on this local offer for the Nikon microscopes, I uploaded to the photos section pictures of the two units this local seller has:

What a beast. I’ll have to find one as a project. Peter

I will, IF.

And that, my dear sir, is exactly why I wrote the program. Please contact me off? list.? I didn't exactly design some of this for public consumption (mostly the Embarcadaro stuff), and you'll need

I'm on (the other) HP 8673D repair project now. This one never worked in the time I have owned it, and I'd been storing it as a parts mule, but decided (now that I have some experience with

Hi John, I uploaded the "Installation and Getting Started Guide" to the files area. I don't have the software. I was looking for it a few years ago but without any luck. I think it was delivered on a

M3.5 is a standard size 3.5x0.6? the odd one is 3.5x0.5 and yes it exists I have a die for it and the 0.6 ( i use the 0.5 in music instrument repair-silly saxophones).....0.7 never existed nor should

Don't grab it, just try it some and see how wide the eyepiece viewing angle is... When it's narrow you get neck strain quickly keeping your eyes just perfectly located.

Fine except for trinocular head is good to have.

I might be able to get an HP 8511A...

This is not true for all trinocular microscopes, it depends on the model. On mine, both the eyepieces and the camera port are always active at the same time. AmScope calls it "Simul-Focal". I believe

I use C++ a lot, usually with QtCreator, though I have previously used Visual Studio. I have Eagle 7.5, 7.6, and 7.7. I use SCAD for 3D printing and also for general 3D modeling. Your program seems

OFFICIAL Thanks for that info. M3.5 seems to be as rare in Australia as 6-32. I used to have boxes of 4BA stuff, but they have long disappeared in about 10 house moves Ove the last 30 od dyears. I

Any input on the Nikon microscope (SMZ645) I may be able to grab locally? Radu. [email protected]> wrote:

I wrote a C++ program that disassembles the .brd file for a project.? It creates an OpenSCAD document that places models of the parts onto the board, giving you a board visualization.? It can handle