开云体育

Does anyone know the part numbers for the cables and probes for this analyser. I have some of the manuals but they dont say what cables to use, and no cables came with the unit when I purchased it

Hi Jim, You are probably missing a driver. Finding one may not be easy. Also did you format the card as DOS or LIF? See

SUCCESS!! I used this free editor https://freehexeditorneo.com/ to edit the PRC (procedure) file This (picture) highlighted in yellow was the critical spot to change from Card to Disk. I made sure to

Hi Burt, The tables do not touch the wall directly, I put a space of 8 inches (20cm), and this space contains a shelf with holes to let the wires pass through. Two 6-inch (15cm) side fans adjustable

In my "home-away-from-home" lab (see earlier picture) I also use wire shelving on wheels, but I don't put anything on them as fillers to keep the feet from being caught in the wires.? Here in

Hi Robert, I do have an old Dell Latitude 600 with the correct slot. Although it recognizes the SRAM card it will not allow access for viewing and editing files. In particular I need to edit the PRC

I found that "DISK" actually needs to be? " :,700,0"? for my HPIB disk drive's address. I learned how to copy a? file from the HPIB disk to any SRAM and now have to see how to delete files on the

I need to do a purge of the equipment I have.? I got into electronics through repair.? So almost everything I have I restored myself from a broken state.? But I didn't really know if I would need

I use wire frame shelves on wheels for the working equipment. You can clamp it together.? The main workbench is also on wheels. For some equipment, the corner is beveled to allow access by crawling

I too mostly lurk, and post occasionally. Here is my lab. I have a smaller one also as I have not used this one in about 8 years. The tables are 6 foot long, but I had to put extra legs in the middle

Gang, Yves, welcome to the group. I mostly lurk way in the background. I find this to be a great thread. I, like many of you, am a great collector of test and measurement equipment. Most of it I need

hello Yves, great repair that of the opt 130 In my case the opt 130 has always worked well and I have never needed to study it in detail Did you do the realignment by adjusting the trimmers on the

If you join the (rather pooly named) /g/HP8924-Family-Spectrum-Analyzers group you fill find the RF tools programs in the files section. Lots of other stuff for the 892x tests sets.

Sorry, these would work for DB connectors but not the HIPB.? ?Well, wouldn't be able to daisy chain...

McMaster-Carr: These should work https://www.mcmaster.com/products/screws/system-of-measurement~metric/thread-size~m3-5/captive-panel-screws~/ Also thumb screws:

Thanks everyone for your suggestions ! I am going to try a solution which re-purposes the screws from a discarded HP-IB connector, and of course I will post more details on this list if the experience

Ha Wilko, ik zie een 86290 die er "naast" staat een veel voorkomend probleem als gevolg van verlopen weerstanden. Het is snel te zien door de frequentie te checken in de basisband 2-6 via de

I've been accumulating T&M kit into my ham shack for quite a while now. The shack is in the attic which makes for a cozy but sometimes crowded workspace. I did, interesting maybe, choose the smallest

Joel, Where are you located? I have a couple of spares. Robert (UK).

Digikey and Mouser has them, but they are expensive.