开云体育

They are gone.

My job at Raytheon Technologies, too.? We have all lab equipment and even ESD-safe workstations calibrated periodically by Keysight.? I have to wonder if they do as good a job on the Tektronix

Yeah, I was going to say this. Requirements to have all the equipment with an up-to-date cal done by someone who theoretically knows what they are doing, are pretty common. At my job, depending on

Some companies have ISO or other certifications that require all test equipment (there are some exceptions if marked Not Subject To Periodic Calibration or similar) be periodically calibrated by a

Love it Quoting Jeremy Nichols <jn6wfo@...>:

Happy to report that the transplant is successful and I now have two good 438A power meters. The parts unit is back on the shelf. Sean

Bill, I agree with soooo much of what you said, thank you. As to scopes it was my understanding Tek had a patent on their circuit and didn’t license it. We had tek scope in the EM shop at Opto div.

WHAT’S LYSDEXIA?

AND SPREAD THE WORD OF DOG.

Thanks for this, I’ll be forwarding the last section to one of my customers. He has another instrument, an electronic resistor, that uses the LZ ref which is critical to the reading of the unit.

I recently got an 8970B & 346B from Pete. I'd like to add an 8971B to the system so I can cover the 2.4 & 5 GHz ISM bands. There are some 8971Bs on ebay, but the the cheap ones are "untested, no

I am also dyslexic and there was a Fac ook post recently that I loved: DYSLEXICS OF THE WORLD UNTIE :-) Quoting Paul Bicknell <paul@...>:

Very good Sean, Good luck on the meters. Dave

Hope you have a speedy recovery! Appreciate the clarification. HP left enough slack in those option 002 cables to slide the rear panel assembly back far enough to get the fan module out. I have

A few months ago, I was using my 8753C VNA, when I noticed that the "loss of phase lock" indication would occasionally appear.? Something was wrong, but I was busy with other things.? So, I set the

A memory to add to this discussion...? After moving to California in 1957 I quickly arranged to make a trek down to see the Hewlett-Packard plant on Page Mill Road in Palo Alto? -- the one with all

I’m in my hospital rm after having knee surgery yesterday. You’re right, four corner screws no eight. If you can’t move the back panel enough to get the fan in and out, you’ll need to unplug

We just moved to a new house. I dumped a lot of my stuff, over-energetically apparently, don't have some instruments I really miss. My lab is still totally disorganized. Main issue it that it's longer

Just a thought how about doing the best test equipment in a year and repeating it for every 5 years Eg 1990 Spectrum analyser HP xxxx oscilloscope teck XXX counter EIPXXX signal generator HP XXX audio

I have a friend who built two huge workshops into his house each with 15ft x 30" or more deep. When I go to visit there is no place to put my piece of paper to write on. My other friend with a