开云体育

Pics available… Sorry for bandwidth… Pete wa2odo

Thanks, jfphp.? Good information.? Jim?Sent from my Verizon, Samsung Galaxy smartphone

Good to know, Chuck.? I will keep my replies from the phone brief.? As to the quoted text getting deformatted, I don't think I can do anything about that.?Sent from my Verizon, Samsung Galaxy

Good.? I guess my phone and laptop computer automagically include the previous text.Yes, people who don't provide context are forgiven their minor iniquities.Thanks.JimSent from my Verizon, Samsung

Thanks for the explanation, Job. I didn't see that part of your Twitter post (I guess I don't know hoow to use Twitter and Facebook). Those rubber mounts are actually a big deal. They are there to

Sergey, The rear output option is unattractive unless you want to commit the 8340 for use with a 8510. Then it's better than the front output. Since this thread is about the use of a 8340/8360 with a

Dana, If Walter doesn't have one you can get a new one direct from Keysight, pn 34401-49321, cost is $12.79. I replaced mine a year or so ago. Steve K.

Hi Dana I'mnot familiar with that exact faceplate but if it's unmarked, I've found 1.5mm clear acrylic cut to size works nicely for this. Notches, if required by the fitting, can be dremeled on the

Hello Walter, would you happen to have a replacement window for a HP 34401a ? Mine ie scratched up bad and would like to replace it. Thank you, Dana J Smith

I’ve done the “make program disk” and “load program disk” and it works a treat. I also converted an 8510X to 8510C. Someone mentioned awhile back that you couldn’t take a program disk from

If you get an 8340B with the options that provided rear panel output and no attenuator it was probably from an ATE system or 8510 system. The attenuators are commonly available on eBay but the special

834XX is a boxed synthesized 83592/5X where all aligments are made with potentiometers. 836XXX is a DAC based system with all aligments made with the RPG on the front panel. Beware of the various

Hello Everyone. Been a lurker here for awhile. Great stuff here. I find myself reading about equipment I don't even own. I need a little direction. I have s HP3336b that when I turn it on will show a

When Jim Ford replies from his Samsung phone, he wipes out all of the formatting. When he replies from his Windows box, (em client) formatting is preserved. His reply was the first to have destroyed

Hi Vladan, None of these were necessary :-) a screwdriver and some patience is all I can remember. This shows the difference in depth of the fans:

Those people who post a single "Me too!" letters are mentally ill and it is a sin to insult them. Thou shalt forgive them; for they know not what they do... Your quoting is fine; it is somebody else

Thanks, Sergey. I have updated my "wishlist" HP 8340 entry to add "best with no options". BTW, do you see your own text below? When I reply, I see the previous text on my screen, and when I receive my

On Fri, 28 Feb 2020, Jim Ford wrote: I don't know who had all that message thread screwed up (guys, _PLEASE_ setup proper quoting -- it is impossible to read) but as of 8340B I can tell that the best

Option 007 is relaxed phase noise, page 1-10.? I guess James Bond wasn't concerned about phase noise!? 3 dB worse across the board except is the same at 100 kHz offset (not surprising as that's

You must have meant 8350A sweeper, not the 8530A microwave receiver.?Good to know for the future when I put together an 8510 system.? I already have an 8350B, so that part is done.? That is, until