开云体育

Harrison 6367A 0-36vdc, 0-10A, 110 vac input, $50 plus shipping: How much does it weigh? Can you ship USPS? [hp_agilent_equipment] <hp_agilent_equipment@...> wrote:

Hi Calvin The blueish crud is most likely highly alkali potassium salts, mechanically remove as much as possible then neutralise with white wine vinegar. Wash away any residue with distilled or

Hey Peter, just a random data point here, from my own experience. I picked up a 3585A awhile back that seemed to be a basket case. Display problems, sweep control problems, pretty much everything

I use the citrus based Goo Gone to remove most labels. The citrus oil is very thin, and it evaporates. I have even used ot to remove price tags from paperback books. A few drops on a cotton ball, and

Hi there, When I opened up my 8672A synthesized CW generator, I found the NiCad batt pack was leaking. It was clean few years back. I removed it immediately but it left blueish and sort of oily

?????? Liquid dishwahing detergent like Dawn is safe for nearly everything. You have to test paint. Use a cotton swab somewhere where a mark won't show. Naphtha is safe for many paints but not

I want to clean 8350B/83592B sweep source, 8510 Vector Network Analyzer display and I/F sections, and the S-Parameter test set, and a 8566B spectrum analyzer(RF and Display). The 8510C panel is

Hello, no problem. If you ever change your mind let me know With best regards Tam Hanna --- NEW: Enjoy electronics? Like seeing oscilloscopes get repaired? Please subscribe to my new YouTube

Does anyone have the pinout for the 5086-7267 YIG oscillator handy? My google-fu seems to be weak today. Thanks, -Dave -- Dave McGuire, AK4HZ New Kensington, PA

So far I've removed all the boards I could that were relatively easy. I have not touched the ones that are under a metal panel identified as A and then a number. A31 or A32 for example. I'm no

?????? You have not said what equipment you want to clean. It does make a difference. I have detailed the method of washing employed at the -hp- service center a great many years ago but this

I find that Ronson lighter fluid, which is just naptha works very well.? This includes not only label goo, but a wide range of "dirt".? It's mild and doesn't hurt plastics (at least not any that

Hi Tam, No, thank you. Frank

The only thing I'd wash with water and soap is the front panel itself (completely removed from the instrument, and any pcbs or wiring harnesses removed from it), any knobs once removed from the pots,

Tobias, The main coil is for pretune -- which brings the center frequency of the YTO to the YTO PLL's capturing range which is usually +/- 20~30mhz around the CF. The FM coil is used to perform the

Thank a lot for all your inputs guys! My instruments work very well for their age. I just wanted to make them great again:) After reading your posts, I figured I will stay away from using any

The 3596 was used to measure carrier levels in a multiplexed system at 75 ohms. The 75 ohm input would be used to terminate a 75 ohm output directly. The 10k input would have been used to bridge a

One of the inputs on the 3596B is a 75ohm, another is a 10k ohm//50pf. I can understand with a Voltage across a 75 ohm resistor how to get a power reading. What happens when you switch the unit to

Hi George, I don't know. I'll receive the unit this week, I'll see if I bought trouble or if I got a deal. Qmavam

I keep hearing folks here mentioning water penetration of circuit board substrates, I think I can help you lay that myth firmly to rest. The process of making pcb's has always involved many long