Peter,
When FM Measurement is selected, the display will show peak deviation. The steps are outlined in the OP Manual under Section III Operation, Getting Acquainted.
Dennis
--------------------------------------------
toggle quoted message
Show quoted text
On Mon, 10/16/17, Peter Gottlieb hpnpilot@... [hp_agilent_equipment] <hp_agilent_equipment@...> wrote:
Subject: Re: [hp_agilent_equipment] 8901B Power level zeroisation
To: hp_agilent_equipment@...
Date: Monday, October 16, 2017, 10:11 PM
Ok, so that worked, but what does
percent mean for FM?? kHz deviation would be
more useful.
Peter
On
10/6/2017 9:25 AM, Dennis Czelusniak czelusniakd@...
[hp_agilent_equipment] wrote:
>
>
>
E1 is invalid key sequence if calibration is pressed while
not in AM or FM.
> 8480 series sensors
work with your unit, high priced 11722A not required.
> If you have option 10, connect calibrator
output to input, select AM, push
>
calibrate and wait, takes about 20 seconds, do the same with
FM, display
> reading will be 99.0 to
101.0%
>
> Dennis
>
>
--------------------------------------------
> On Fri, 10/6/17, matt.ames7bc@...
[hp_agilent_equipment]
> <hp_agilent_equipment@...>
wrote:
>
> Subject:
[hp_agilent_equipment] 8901B Power level zeroisation
> To: hp_agilent_equipment@...
> Date: Friday, October 6, 2017, 2:57 AM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
Hi all,
> I have an 8901B here that I use
to
> measure power with, using the
internal power detector and
> *not* the
fancy external 11722A sensor.
> When I
have nothing connected to the
> input,
and I press the zero key, I get an Error
> 21.
> Does anyone know
what I am doing wrong,
> and how to zero
the internal power level
> sensor?
> Cheers,
> Matt
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
------------------------------------
Posted by: Peter Gottlieb <hpnpilot@...>
------------------------------------
------------------------------------
Yahoo Groups Links
Traditional
? ? (Yahoo! ID required)
? ? hp_agilent_equipment-fullfeatured@...
