Ok, so that worked, but what does percent mean for FM?? kHz deviation would be more useful.
Peter
toggle quoted message
Show quoted text
On 10/6/2017 9:25 AM, Dennis Czelusniak czelusniakd@... [hp_agilent_equipment] wrote:
E1 is invalid key sequence if calibration is pressed while not in AM or FM.
8480 series sensors work with your unit, high priced 11722A not required.
If you have option 10, connect calibrator output to input, select AM, push
calibrate and wait, takes about 20 seconds, do the same with FM, display
reading will be 99.0 to 101.0%
Dennis
--------------------------------------------
On Fri, 10/6/17, matt.ames7bc@... [hp_agilent_equipment] <hp_agilent_equipment@...> wrote:
Subject: [hp_agilent_equipment] 8901B Power level zeroisation
To: hp_agilent_equipment@...
Date: Friday, October 6, 2017, 2:57 AM
Hi all,
I have an 8901B here that I use to
measure power with, using the internal power detector and
*not* the fancy external 11722A sensor.
When I have nothing connected to the
input, and I press the zero key, I get an Error
21.
Does anyone know what I am doing wrong,
and how to zero the internal power level
sensor?
Cheers,
Matt
