Hi Bruce,
I noticed while looking thru the 180C/D manual available from the Agilent site a list of standard options in Secition 7-5 (page 7-4):
"Option H03 - Standard model 180C is modified to provide 10 mV/div maximum sensitivity for the horizontal amplifer."
don't know if this is the same on the 180A? It would seem likely however.
cheers
Paul
toggle quoted message
Show quoted text
On 24/01/2007, at 11:07 AM, BSugarberg wrote:
Hello,
On the front of the scope, under the bezel, it says:
"180A Oscilloscope - Option HO3".
The scope also has the following stickers:
"Northern Telecom, Montreal" and "Bell Canada - T. A. Engineering - Test
Set". (There could be something else on the 2nd sticker, but the part
under "Test Set" is covered by another "Bell Canada" sticker).
Perhaps the HO3 Option was something special for Bell Canada, or for
telephone work?
The plug-ins:
1801A Dual Channel Vertical Amplifier (50 MHz).
1821A Time Base and Delay Generator.
S/N: 975-10237.
Thank you,
Bruce
=================
JOHN BYERS wrote:
Hi Bruce
Can't find mention of a H03 Option for 180A in my 77 thro 82 HP catalogues
(incomplete). Nearest I can find is Option 003 (no probes) and H49
(remote programming) for a 181. Where did you see option H03 quoted?
Rgds John
Yahoo! Groups Links
