What about the GPIB cable? Or the cable between IF Unit and Display
unit? You can also try to connect PC with a GPIB adapter to the port and
query the GPIB bus to see if the Display unit really has the correct
address.
toggle quoted message
Show quoted text
On 15/11/2023 11:02, tom_iphi via groups.io wrote:
Hi folks,
still working on the 8510C system.
I am encountering this "System Bus Address Error" and I don't understand
why.
The system GPIB addresses are set correctly.
- The 8350 is properly addressed the 8510C
- The test set is properly controlled by the 8510C
Replacing the 8510C display unit by my old 8510B one, the system works
properly, no errors.
GPIB system address settings are identical in the B and C.
Any ideas what that error could mean in this case?
Tom
