The only one of those I recognize is the 3456A DVM, as I purchased one a year or two ago. eBay prices range from less than US$100 to several hundred depending on condition, calibration, and the seller¡¯s knowledge of the equipment and the market. If your 3456A works, it¡¯s probably not that badly out of calibration and should fetch $100 or more.
Jeremy?
On Sat, Nov 6, 2021 at 2:15 AM Paul Bicknell <
admin@...> wrote:
Hi Chris
Welcome to the group but your problem is not new and one that most on this group suffer from
?
Covid shut down for the past 2 years? has meant a lack of rallies / to reduce our stock and fill in the missing items we could better use
With that you didn¡¯t say what you are wanting to achieve as in which branch of testing to you require
Analog / audio
Digital / logic
Radio frequency this is the big one as this is dependent on the highest frequency you want to work at
Regarding redundant gear this is difficult as redundant because you don¡¯t require that measurement OK out it
But redundant because you already have one, The day after you sell the redundant one you will require it
?
Best of luck with the sort out? Regards Paul ?
?
From: [email protected] [mailto:[email protected]] On Behalf Of Chris Wilkson via
Sent: 06 November 2021 06:50
To: [email protected]
Subject: [HP-Agilent-Keysight-equipment] New member intro
?
Hello Group!
I'm trying to get a handle on my test gear and decided to start looking at my HP hoard.
I need to decide what to keep/fix/purge/replace and finally joining here seemed like a good first step.
I have at least the following items, maybe more hiding unseen in the various piles:
HP:
- several linear power supplies,
- K04-0980A Powerstat
- a gain phase meter (3575A?)
- 33120A function generator
- 3456A voltmeter
- a pair of 1662AS logic analyzers (with at least one keyboard and one mouse...more I think)
- 8505A vector network analyzer with 8501 storage normalizer and 8503A S-parameter kit
Agilent:
- 1147A scope current probe (for the 3034T 'scope below)
- 34410A multimeter
- and maybe a scope in storage?? I need to check on that.
Keysight:
MSOX-3034T oscilloscope
Tektronix:
- approximately 0.42 container ships full of big iron piled ceiling high in the living room
Random other MFG's:
- a pair of IBM Model M keyboards, one for work and one for home (they count as boat anchors too!)
- generally too much stuff !!!
The immediate goal is to get all of this off the floor and off the benches so I can at least check functionality of everything.
Longer term I want to eliminate redundant gear and fill some holes in the lab and then start playing with stuff again!
Cheers,
-Chris
Jeremy Nichols