Hi Dave,
Thanks for yor quick response. Yes my whole house was smelling for some days. SO if I take e.g. 0,1 uF that will do?
Best regards,
Mark
toggle quoted message
Show quoted text
Op 03-11-2021 21:54 schreef Dave McGuire <mcguire@...>:
On 11/3/21 4:50 PM, marktwoud@... wrote:
I have an HP8590 with the 0950-1977 power supply unit inside.
In the power supply the Class X capacitor has melted down. I want to
replace it, but I can?t read the Farad value anymore.
The only indication left is 250V SH LD and number 40/085/56. It is the
capacitor directly at entering of the 230 Volt, inbetween the 230 Volt
points.
I've added a foto as attachment
Do you have information regarding the Farad value of this capacitor.
Ahh, a Rifa. Bet that smelled nice.
The capacitance of these line bypass capacitors is not at all
critical. Just find one of the proper safety class and the right
physical parameters, and it will be close enough.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
