Hi Dave and Jim, thanks for the emails. I do have the R3767BH manual, what you sent Jim was for what I assume the slightly more recent "G" version. Thanks anyway. Alas no info gleaned from a scan of it.
And Dave I had no idea, thank you!!!
Much appreciated all who took a moment to write.
J
Dave Emery wrote:
toggle quoted message
Show quoted text
On Fri, Apr 17, 2020 at 02:58:01AM +0000, Jim Ford wrote:
Are you guys familiar with the existance of
[email protected] ?
There is a community of folks there who might help...
Hi, Jesse.
A friend has a similar VNA, and for some reason I have the manual. I
didn't see anything in the index about setting the time and date, but I
could have missed it. Here's a .pdf if you don't already have it.
HTH.
Jim Ford
------ Original Message ------
From: "Jesse Lackey" <jesse@...>
To: [email protected]
Sent: 4/16/2020 5:06:24 PM
Subject: Re: [HP-Agilent-Keysight-equipment] Advantest R3767BH VNA
date+time setting
Hi Stan, there isn't an enter key, but there is X1. No dice, it is still
Jan 1 1970. Tx for the thought tho!
J
Stan wrote:
Hi Jesse,
Although I'm not familiar with your particular VNA, I've found with a lot
of T&M gear that when setting the date, time, or any other numeric entry,
you need to press the Enter key or its equivalent (e.g., Hz, x1, etc.)
after you key in the new value. Otherwise, the value will not be updated.
Regards,
Stan
