On Fri, Apr 17, 2020 at 02:58:01AM +0000, Jim Ford wrote:
Are you guys familiar with the existance of
[email protected] ?
There is a community of folks there who might help...
Hi, Jesse.
A friend has a similar VNA, and for some reason I have the manual. I
didn't see anything in the index about setting the time and date, but I
could have missed it. Here's a .pdf if you don't already have it.
HTH.
Jim Ford
------ Original Message ------
From: "Jesse Lackey" <jesse@...>
To: [email protected]
Sent: 4/16/2020 5:06:24 PM
Subject: Re: [HP-Agilent-Keysight-equipment] Advantest R3767BH VNA
date+time setting
Hi Stan, there isn't an enter key, but there is X1. No dice, it is still
Jan 1 1970. Tx for the thought tho!
J
Stan wrote:
Hi Jesse,
Although I'm not familiar with your particular VNA, I've found with a lot
of T&M gear that when setting the date, time, or any other numeric entry,
you need to press the Enter key or its equivalent (e.g., Hz, x1, etc.)
after you key in the new value. Otherwise, the value will not be updated.
Regards,
Stan
--
Dave Emery N1PRE/AE, die@... DIE Consulting, Weston, Mass 02493
"An empty zombie mind with a forlorn barely readable weatherbeaten
'For Rent' sign still vainly flapping outside on the weed encrusted pole - in
celebration of what could have been, but wasn't and is not to be now either."
