开云体育

Tnx Mikael, works better for me. Only sometimes the specter is very wide and impossible to decode it I couldn't find what it the reason I attached specter. Any idea? Maybe is my fault because I

Try this.

missing volatile bool proceed = false; [email protected]> wrote:

Hi, thanks but I got 'proceed' was not declare in this scope? Br Jan wrote:

All other code leave as is, just inser those pieces of code ISR(TIMER1_COMPA_vect) { proceed = true; } put in the end of void setup() noInterrupts(); // Set up Timer1 for interrupts every symbol

Hi, Why I saw only myself was because I use 20meters away Malachite SDR with 20cm piece of wire for antenna on receiving side. Mikael I think I need more to add missing proceed and I think I need

Jan There is a small problem in the timing of wspr tx in the original ict code, if you insert this to the code you will see a SIGNIFICANT improvement of the decodability of the transmitted

Hi Jan It is totally normal if you look at my screen you will see sometimes 3 copies of packets 100hz apart This is caused by your receiver overloading by a close by transmitter and making extra

Hi, any idea why I see two packets on my wspr decoder at the same time 100hz away. But never find my self on wspr.net.org map. Do I need an amplifier because I tested two weeks on my balcony. I saw

The cells need to be outside in direct sun. Indoor light will not work.

Generally any cells in a 6 psc series configuration will work, dont know what cells you are refering to as 20x40 maby its the 19x39mm? then 6 of those will work fine under sun, if you gona test it

Hi Anyone have a good suggestion for solar cells and how many need to connect it together? I have here 20mmx40mm but in a room with light I got only 200mV... Br Jan wrote:

ow! did not know this step. thank you Enviado do meu smartphone Samsung Galaxy. -------- Mensagem original -------- De : SQ9GOL <sq9gol@...> Data: 07/08/2020 13:00 (GMT-03:00) Para:

Maked set payload? http://habitat.habhub.org/genpayload/ W dniu 07-08-2020 o?17:57, Jeferson Paiva pisze: -- SQ9GOL Peter Greetings from

I'm using this script, I'll post details. Enviado do meu smartphone Samsung Galaxy. -------- Mensagem original -------- De : SQ9GOL <sq9gol@...> Data: 07/08/2020 12:46 (GMT-03:00) Para:

Contact with David https://github.com/sm3ulc/hab-wspr 73 W dniu 07-08-2020 o?16:50, Jeferson Paiva pisze: -- SQ9GOL Peter Greetings from Poland website: www.sq9gol.xyz '73

Good Morning! I would like to help to make the balloon balloon through habhub, I am not able to make the script go up the data.

Wow! I intended question was to me! My apologies, guys! Sorry. Roberto [email protected]> ha scritto:

The firmware I use is almost certainly different to what you have, so you will need to ask the author of your source code how to do that. 73, Bob ZL1RS

Excuse me, sir! Here correct info: 00 is channel 1 01 is channel 2 ..... 09 is channel 10 Q0 is channel 11 Q1 is channel 12 ...... Q9 is channel 20 <roberto.pietrafesa@...> ha