开云体育

Mike, Try VTP 3.7, it is like tso for VS1 Gary?

Thank you for your diligence. I have generated a 6.7 system from your notes and it is working well. I do have a question about the date fix. I saw that in the herc config file there is this entry:

Don't know if anyone is still around. Just wanted to let you know that I got VS1 6.7 genned and it's working great.

Hello anyone, The VS1 9202 CUMPTF tape in the files area, does it go against the 6.0 system or the 6.7 system? Thanks.

Hello all, does anyone have a VS1 System Generation manual later than release 2 they are willing to share?

Mike, What version of Hercules or Hyperion are you using? It would help to attach a complete listing of the entire failing job print-out, if possible. Also, a "3330" is the original model, while

On the VS1 starter system that came with the V1.6.7 zip file. I received and error when running the first job. g01-init-dasd-dlib.jcl. It was: IEF236I ALLOC. FOR G01INTDL INIT IEF237I 149

The following files have been deleted from the Files area of the [email protected] group. * vtpv3.7.zip *By:* Gary Cozzolino <gcozzie@...> --- The following files have been uploaded to

Gary Cozzolino <gcozzie@...> added folder */vtpv3.7.zip*

My first thought is, you would probably be better off building VS1 6.7 rather than 6.0. The 6.0 distribution is pretty much service-free, while the 6.7 distribution has some maintenance on it. But

Roberto, Its been a while, but I had the same problem with a number of the link edit steps in the generation jobs. After that occurred, I changed the size field in the link edit steps to be

Hi, Roberto has been helping me out with the setup of auto install procedures for installing various operation systems on IBM360 simulator. These are very helpful to me since they allow for

It would appear that your link editor requires a change or perhaps larger memory allocated to the system. I have never worked with this system so have no idea with regard to the specifics. But your

Hi All I'm trying to sysgen Kevin Leonard 's OS/VS1 Release 6 from on Richard Cornwell IBM360 simulator, based on SimH As It is not hercules, I must start with .aws tape instead of already made

Heh, Oops .... "two up" ? :) Mike

The reply should probably be something like: r 00,'hardcpy=(syslog,all,cmds)' or r 00,'hardcpy=(ddd,all,cmds)' where "ddd" is a console that is a printer or printer-keyboard. VS1 NIP's

Mike, Did copy the punched card output from g08-stage1.jcl to g09-stage2.jcl (or at least submit that punched card output instead of g09-stage2.jcl.) Chris --

In the Readme of the vs6.7 generating-system directory : "g09-stage2.jcl You will create this file from the punched output from job g08-stage1.jcl Submit the jobs to VS1. There will be 14 jobs,

Thx, that's what I ended up doing (using telnet), though I started with the configuration file in conf/vs1-fdlb67.conf. Even if I connect with telnet as device 01f, if the "0010 3270" line is NOT

Mike, You can not use 3270 terminal with the starter system! you must use TELNET as the console device, with "set localecho" & "set ntlm" o localhost 3270 try this will connect. note no error correct