Thx, that's what I ended up doing (using telnet), though I started
with the configuration file
in conf/vs1-fdlb67.conf.
Even if I connect with telnet as device 01f, if the "0010 3270" line
is NOT commented out, the "..IEA150A SPECIFY HARDCPY" message is sent
to the *telnet* terminal, ... preventing the rest of the IPL process.
Mike.
toggle quoted message
Show quoted text
On 9/26/21, Gary Cozzolino via groups.io <gcozzie@...> wrote:
Mike,
You can not use 3270 terminal with the starter system!
you must use TELNET as the console device, with "set localecho" & "set
ntlm"
o localhost 3270 try this will connect. note no error correct must be
careful!!
On Saturday, September 25, 2021, 06:47:48 PM MST, Mike Stramba
<mikestramba@...> wrote:
Hi Kevin,
I'm trying to ipl that system now.
What is the reply for the 'IEA150A SPECIFY HARDCPY'? message ?
thx
Mike
