开云体育

Are you using the standard scripts to start the TK4 / 5 system ? Here the printer spools are started as standard. Need to point out that I have modified the ctl file to support translation to .pdf

Than you for your reply. First of all, I have the proper files (`prt/prt002.txt` and `prt/prt00e.txt`) in place. I understand the mechanics of starting the printers, however, I must ask how come

Marco First – lets look back at the previous LOG you sent – The printers ARE already started – Previously – I pointed out that PRINTER1 had a job (see the $HASP190 message?) - called MF1

Thank you all. I attach my (two) configuration files. But why doesn't TK4- start the printers?? If I messed up something, where should I look?? After all I just added a user, a DASD and a EBCDIC

Hi all, Mostly is a $sprt1 and $sprt2 enough. Don't use the $zprtn command. Cheers, Rob

Rob, Thanks for the link. As it turns out, vm6pext is there too, although in a rather primitive display. :-) Cheers, Rene FERLAND, Montreal

https://web.archive.org/web/20250119104256/https://geronimo370.nl/ [email protected]> wrote: -- Robert AH Prins robert(a)prino(d)org The hitchhiking grandfather

Hello Rene, Am 07.03.2025 um 06:50 schrieb René Ferland via groups.io <ferland.rene@...>: First and foremost: Look in web.archive.org. :wq! PoC

René Ferland wrote: [...] I agree with you 100%, now that I know the background of the situation (which I did not know at the time I posted my response). But generally speaking, it's not necessary

My own website (vm6pext) was hosted under geronimo370.nl. It was a small site providing starter knowledge for all the vintage systems running under Hercules. On January 26th, I received an e-mail from

Marco Antoniotti asked: FYI: You might want to bookmark one of the following sites (or any other similar sight of your choosing, found by googling): * https://downforeveryoneorjustme.com/ *

No, it's not just you. To my knowledge, the owner of the site has closed it for good. Cheers, Rene FERLAND, Montreal

I get :?? Please stand by while configuration is in progress.

On 3/6/25 2:31 PM, Marco Antoniotti via groups.io wrote: > Hi > I run a version of TK4- (I know: I should move on to TK5).? This happens on a Mac, Mac OS Sequoia and Intel machine. > I start TK4- and

I didn't see Hercules initializing either (or any) printer devices in the 3033.log. I may have missed them, but might want to check that. [email protected]> wrote:

Marco, Just a couple of points – Looking at the LOG file you sent – You have BOTH printer 1 and printer 2 – waiting for you to perform the SETUP THIS is why you are not getting any output –

It was down yesterday for me too.

Hi I run a version of TK4- (I know: I should move on to TK5).? This happens on a Mac, Mac OS Sequoia and Intel machine. I start TK4- and run a couple of simple things (these days I am fooling

Hi it looks like the `geronimo370.nl` site is down.? Or it is just me? Thanks Marco -- Marco Antoniotti Somewhere over the rainbow

Ditto on the thanks Diego Your post helped me too. Jim