Re: Domain bsp-gmbh.com expired
https://sitereport.netcraft.com/?url=+bsp-gmbh.com -- Drew Derbyshire "A little voice inside my head said don't look back, You can never look back . . ." -- Don Henley
By
Drew Derbyshire
·
#1313
·
|
Re: Domain bsp-gmbh.com expired
Locations to download the TK3 CD image: Original location posted on Volker's site: http://www.ibiblio.org/jmaynard/turnkey-mvs-3.zip
By
ScottC
·
#1312
·
|
Re: Domain bsp-gmbh.com expired
Just got off the phone with "Jenny Angell" at Network Solutions.? Good news!? We have 30 days from 6/30/2020 (for someone) to pay (at least) the 1 year renewal price of $73.98 ($37.99 per year +
By
ScottC
·
#1311
·
|
Re: Domain bsp-gmbh.com expired
Jim, what was the filename? I'm not having any luck finding it.
By
Doug Wegscheid
·
#1310
·
|
Re: Domain bsp-gmbh.com expired
well, hopefully the server is still up, and another snarf can be done, if we only knew the IP....
By
Doug Wegscheid
·
#1309
·
|
Re: Domain bsp-gmbh.com expired
Attached the `tree` command output from the 2020 backup, the DIFF is against the 2012 backup. Not much changed. Also, I recently uploaded Volker's cookbook zip over on the turnkey-mvs forum in the
By
Jim Morrison
·
#1308
·
|
Re: TK4- On a Raspberry Pi
YES.
By
Vince Coen
·
#1307
·
|
Re: Domain bsp-gmbh.com expired
My timing was excellent, I snarfed the site 2020-06-26. I was way overdue since my prior snarf was 2012-04-21. A different of 567 bytes between the two dates, so even older backups should be nearly
By
Jim Morrison
·
#1306
·
|
Re: TK4- On a Raspberry Pi
I built gcc from source once on a Pi Zero.? It took 5 days elapsed wall clock time. But it all worked. Bill
By
Bill Lewis <wrljet@...>
·
#1305
·
|
Re: Domain bsp-gmbh.com expired
Hello Marco, Am 06.07.2020 um 22:10 schrieb marcoxa@...: Hmph, if should have done a complete wget -m of the site before. But now it's possibly too late. :-( :wq! PoC PGP-Key: DDD3 4ABF 6413
By
Patrik Schindler
·
#1304
·
|
Domain bsp-gmbh.com expired
Hi I just wanted to let you all know that the domain bsp-gmbh.com expired on June 30th.? I learned a bit of MVS from there, and it may be that the information contained therein may now be available
By
Marco Antoniotti
·
#1303
·
|
Re: TK4- On a Raspberry Pi
Michael, Yeah ... no worries ... :-) Thanks again for the clarifications, not just for myself, but for "the archives" ... Mark
By
Mark Waterbury
·
#1302
·
|
Re: TK4- On a Raspberry Pi
The caveat is that the destination Hercules has to support any forms of compression that the DASD you are moving use. If you are using prebuilt Hercules' *probably* ok, but I got bit once moving some
By
Doug Wegscheid
·
#1301
·
|
Re: TK4- On a Raspberry Pi
I've switched my MVS and VM images between x64 abd ARM (RPi) platforms multiple time. -ahd- -- Drew Derbyshire "Even if I have garlic breath?" -- The Grey-eyed Elf
By
Drew Derbyshire
·
#1300
·
|
Re: TK4- On a Raspberry Pi
Dave, Should be no reason you cannot. I move DASD images between instances of MVS on different Linux desktops and even non-system DASD from MVT to MVS. Jay
By
Jay Moseley
·
#1299
·
|
Re: TK4- On a Raspberry Pi
So then, forgive me if this is obvious, I could take a fully generated and configured MVS system, shut it down ¨C tar up the MVS directory like I do for a backup ¨C move that tar file to a Pi ¨C
By
Dave Trainor - N8ZFM
·
#1298
·
|
Re: TK4- On a Raspberry Pi
See /g/H390-MVS/message/209
By
Doug Wegscheid
·
#1297
·
|
Re: TK4- On a Raspberry Pi
I tried it on a Pi Zero; I ended up giving up. **too** slow, couldn't tell if it was stuck or just slow. The slow part was getting the SMP volumes built. I think if you followed Jay's instructions to
By
Doug Wegscheid
·
#1296
·
|
Re: TK4- On a Raspberry Pi
Hi Mark, that might have been in a different thread with roughly the same subject. :-) -- TK4- on Raspberry Pi 4 4GB Raspbian "buster" Die Katze l?sst das Mausen nicht, Die Jungfern bleiben
By
Michael Grom
·
#1295
·
|
Re: TK4- On a Raspberry Pi
Has anyone done a full sysgen on one of these? I am referring to following Jay Mosley¡¯s instructions. Assuming that you follow the Hercules install and compile instructions. I¡¯d assume it takes
By
Dave Trainor - N8ZFM
·
#1294
·
|