开云体育

I have Hercules-4.3.0.10296-SDL I run z/OS 2.4 my PC has a fixed IP address of 192.168.0.69 My z/OS IP address is 192.168.0.66 my router gateway address is 192.168.0.254 my PC is connected via

Hello Dave, Am 02.04.2025 um 09:21 schrieb Dave Wade via groups.io <dave.g4ugm@...> Another possibility is to use FTP, as outlined

Zack, For uploading to a Mainframe you may be able to treat the .BOO files as one long multi-file tape. If you look in the "TAPES" folder on the CD you will find some "TDF" files. These are there for

Hi, Thank you very much for pointing this out. I hadn't stumbled across that particular item in my browsing. It looks like just the sort of thing I was hoping to find. As a bonus, I am able to use

Zack, You will find 9 CD images of 1998 vintage OS/390 manuals in .BOO format here https://archive.org/details/os-390-collection Cheers, John I>’m just writing as a newbie who has recently

https://bitsavers.org/ https://archive.org/details/ibmbookmanager-tryitcd-rom https://archive.org/details/manuals?tab=collection&query=os+390 [email protected]> wrote: -- Mike A Schwab,

Hi All, I’m just writing as a newbie who has recently discovered that BookManager Read for MVS works extremely well with my screen reading technology, as do many ISPf utilities, to be fair.

Thank you René. I totally missed that bit about the "equipment check".? I have no idea why this is happening, and the Sequoia hypothesis (or Sonoma) is the only one reasonable; plus, I am very

The startup procedure is SYS1.PARMLIB(STARTSTD) but I think your problem is not there. As Jeff mentioned, your printers ARE started but you get an equipment check (message IEA000I) on the printers. If

Are you using the standard scripts to start the TK4 / 5 system ? Here the printer spools are started as standard. Need to point out that I have modified the ctl file to support translation to .pdf

Than you for your reply. First of all, I have the proper files (`prt/prt002.txt` and `prt/prt00e.txt`) in place. I understand the mechanics of starting the printers, however, I must ask how come

Marco First – lets look back at the previous LOG you sent – The printers ARE already started – Previously – I pointed out that PRINTER1 had a job (see the $HASP190 message?) - called MF1

Thank you all. I attach my (two) configuration files. But why doesn't TK4- start the printers?? If I messed up something, where should I look?? After all I just added a user, a DASD and a EBCDIC

Hi all, Mostly is a $sprt1 and $sprt2 enough. Don't use the $zprtn command. Cheers, Rob

Rob, Thanks for the link. As it turns out, vm6pext is there too, although in a rather primitive display. :-) Cheers, Rene FERLAND, Montreal

https://web.archive.org/web/20250119104256/https://geronimo370.nl/ [email protected]> wrote: -- Robert AH Prins robert(a)prino(d)org The hitchhiking grandfather

Hello Rene, Am 07.03.2025 um 06:50 schrieb René Ferland via groups.io <ferland.rene@...>: First and foremost: Look in web.archive.org. :wq! PoC

René Ferland wrote: [...] I agree with you 100%, now that I know the background of the situation (which I did not know at the time I posted my response). But generally speaking, it's not necessary

My own website (vm6pext) was hosted under geronimo370.nl. It was a small site providing starter knowledge for all the vintage systems running under Hercules. On January 26th, I received an e-mail from

Marco Antoniotti asked: FYI: You might want to bookmark one of the following sites (or any other similar sight of your choosing, found by googling): * https://downforeveryoneorjustme.com/ *