¿ªÔÆÌåÓý

  1. GroupManagersForum
  2. Messages
Expanded Topics Messages Polls
Date
Re: Subscribing by email failing for one user

 

Mark,

Yes, it says whether they accepted the invite by web or email, but not
whether an email client or webmail was used, I think?
In principle it could find out by tracing the Received fields in the message header, but I can't imagine implementing that check just to identify this edge case.

Shal


--
Help: /static/help
More Help: /g/GroupManagersForum/wiki
Even More Help: Search button at the top of Messages list
Re: Group Guidelines on a schedule #membernotices

 

Su,

I think it should be somewhere else - at least mentioned in the
Member Notices page, but not sure what the protocol is for that.
Post it as a suggestion in beta. But perhaps wait a few weeks first:


Shal


--
Help: /static/help
More Help: /g/GroupManagersForum/wiki
Even More Help: Search button at the top of Messages list
Re: Subscribing by email failing for one user

 

¿ªÔÆÌåÓý

Hi Chris

Yes, it says whether they accepted the invite by web or email, but not whether an email client or webmail was used, I think?

I did an experiment and emailed to the [email protected] address from my email client (Thunderbird through 1and1 POP3) and it did accept his invitation for him.? Not that secure really, but at least he is now subscribed!

Mark


On 24/10/2019 22:55, Chris Jones via Groups.Io wrote:

On Thu, Oct 24, 2019 at 10:26 PM, Mark Cubitt wrote:
I can maybe ask some of them how they applied too.
Your Activity Log should tell you that!

Chris

Re: Subscribing by email failing for one user

 

Hi

Yes, the activity log says whether an invite accepted by web or email, but I don't think I can tell whether it was sent by an email client (POP or IMAP) or via webmail?

Further extract below for the user I mentioned in initial post in this thread.? The email they sent was to:[email protected],?but the final recipient in the returned email was :Final-Recipient: RFC822; <[email protected]>

Mark

details.txt 
Reporting-MTA: dns; re-prd-fep-046.btmx-prd.synchronoss.net
Arrival-Date: Wed, 23 Oct 2019 07:19:12 +0100
Received-From-MTA: dns; re-prd-rgout-001.btmx-prd.synchronoss.net (10.2.54.4)

Final-Recipient: RFC822; <[email protected]>
Action: failed
Status: 5.3.0
Remote-MTA: dns; lb02.groups.io (173.255.221.194)
Diagnostic-Code: smtp; 510 5.1.1 Your email address, xxx@..., is not subscribed to that group. To subscribe, send an email to [email protected], or visit /g/scottishmoths

ForwardedMessage.eml
Subject:
RE: Invitation to join the [email protected] group
From:
"xxx" <xxx@...>
Date:
23/10/2019, 07:19
To:
"'Groups.io'" <[email protected]>
Received:
from ALSPC (109.153.138.204) by re-prd-rgout-001.btmx-prd.synchronoss.net (5.8.337) (authenticated as xxx@...) id 5D99B634036F93FD for [email protected]; Wed, 23 Oct 2019 07:19:12 +0100
Received:
from re-prd-rgout-001.btmx-prd.synchronoss.net ([10.2.54.4]) by re-prd-fep-046.btinternet.com with ESMTP id <20191023061912.NWMN22473.re-prd-fep-046.btinternet.com@...> for <[email protected]>; Wed, 23 Oct 2019 07:19:12 +0100
References:
<[email protected]>
In-Reply-To:
<[email protected]>
Message-ID:
<[email protected]>
MIME-Version:
1.0
Content-Type:
multipart/alternative; boundary="----=_NextPart_000_0019_01D58A3D.3FF64540"
X-Mailer:
Microsoft Outlook 15.0
X-Originating-IP:
[109.153.138.204]
Content-Language:
en-gb
Thread-Index:
AQJ0c15JgI56/VDLNMYfWSPSYjn77AGDDqrm

Re: Odd situation - Yahoo says transfer@ has accepted, status doesn't #transfer

[email protected]
 

Yes this happened to me too.? The actual events and emails from Groups.io seemed to be slightly out of synch.? But the emails did catch up after 12 hours or so.

My understanding (and from the email you did not get yet) is that you can uncheck all the boxes on the moderator permissions.? It just needs to be moderator with no detailed permissions.

On Friday, October 25, 2019, 02:43:11 AM EDT, Su <randsjmj@...> wrote:


What does this mean? I got emails from Yahoo saying that [email protected] had accepted invitations to both groups that I am getting transferred. But I have NOT yet received an email from Groups.io, nor does the transfer status indicate that it has been accepted. (i.e. it still reads "We've received the invite to your group and will accept it soon. There is no need to send another invite.")

Is it OK to go ahead and promote the user to Moderator on the Yahoo groups? Are any particular mod permissions needed?

Thanks,
Su

Re: Odd situation - Yahoo says transfer@ has accepted, status doesn't #transfer

 

And is it OK to start both transfers (to different subgroups) at the same time? I didn't see that thing about one group at a time until just a few minutes ago. :-(
Re: Group Guidelines on a schedule #membernotices

 

Thanks. I added the extra info to the Quick Start document that Duane linked. I think it should be somewhere else - at least mentioned in the Member Notices page, but not sure what the protocol is for that.

Su
Odd situation - Yahoo says transfer@ has accepted, status doesn't #transfer

 

What does this mean? I got emails from Yahoo saying that [email protected] had accepted invitations to both groups that I am getting transferred. But I have NOT yet received an email from Groups.io, nor does the transfer status indicate that it has been accepted. (i.e. it still reads "We've received the invite to your group and will accept it soon. There is no need to send another invite.")

Is it OK to go ahead and promote the user to Moderator on the Yahoo groups? Are any particular mod permissions needed?

Thanks,
Su
Transferring a Yahoo Group to Groups.io #yahoo #transfer #askmembers

[email protected]
 

¿ªÔÆÌåÓý

?
?Have just okayed the Transfer agent and made him a mod-
when I went to give the go ahead? - it stated that I have to be a premium member- which I am albeit? at $110.00
?
Am I to pay another $200.00???? to get a subgroup transferred?
?
thanks for any? replies gratefully accepted....?? help please
Steph
?
Am so confused!!!
?
?
?
?

-------Original Message-------
?
From: Duane
Date: 25/10/2019 6:13:05 AM
Subject: Re: [GMF] Transferring a Yahoo Group to Groups.io #yahoo #transfer #askmembers
?
On Thu, Oct 24, 2019 at 02:04 PM, Robert Ray wrote:
?
>
> I would like to transfer everything over to a new group in Groups.io -
> including member data and files, in particular.? I found that Yahoo
> provide tools for saving all of a groups data but I am not sure how to
> transfer and set it up here in Groups.io
?
There's no provision for importing data to a group here.? You can upload files and photos yourself though.? Take a peek at the instructions for doing a complete transfer at /g/GroupManagersForum/message/19673
?
Duane
--
Search button at the top of Messages list
?
?
?
?
Re: Wrong "welcome" message being sent

 

Brad,

Bruce said:

You can only have one active Welcome message at a time. If you don't
make one active, the system sends a default.
You can have none active if you want none to be sent.

The time the system creates one automatically is the first time one is needed, if you haven't created one yet. Not having any welcome message is different in that way from having one or more, but none active.

Shal


--
Help: /static/help
More Help: /g/GroupManagersForum/wiki
Even More Help: Search button at the top of Messages list
Re: Group Guidelines on a schedule #membernotices

 

Su,

Is it pretty easy for me to paste in what you wrote for future reference?
Yup. The Wiki page editor works much the same as the message composition for New Topic or Reply. One difference is that Enter is a paragraph break in the wiki, but a line break in messages. Shift+Enter is the opposite.

Shal


--
Help: /static/help
More Help: /g/GroupManagersForum/wiki
Even More Help: Search button at the top of Messages list
Re: redirect when uploading to group

 

I would run a virus scan.?
?
Susan B

[Mod note: good advice, and a malware scan. MyWeb is the root name of a family of known Potentially Unwanted Programs. , , etc. Both operate by re-directing your browser through their ad sites.]


On Oct 24, 2019, at 11:31 PM, Pamela - N1ZKH <pamela.n1zkh@...> wrote:

Tried to upload a few files to my group, but get a redirect to > and says can not connect. Then when I cancel and go back to the group, all of the "buttons" show link to that site. Only way to get back to showing links is reload page.

Have no idea if this is what site is supposed to do.

Thank you for any and all help
Re: Limiting Transferred Photo Resolution

 

Larry,

I believe that setting works for new uploaded photos; I don't know it
applies to the photos transferred from the Yahoo Group.

Is anyone certain of the answer?
It does, and I am. I had to make use of that fact when transferring one of my own groups (which had about 4.7 GB of photos at Yahoo).

The transfer agent downloads the images at full resolution from Yahoo, and then applies the setting as it copies them into your Groups.io group.

Shal


--
Help: /static/help
More Help: /g/GroupManagersForum/wiki
Even More Help: Search button at the top of Messages list
Re: Color of wiki links #wiki

 

Sandi,

My first attempt at this. Some on the links on the wiki pages are blue
and some are gray. I have visited all the pages so that doesn't seem
to be the reason.
That is the reason.

The link coloring is a browser function that compares the URL of the link to your browsing history. The specific colors are set by the style sheet for the page. I'm not sure why some of your links are showing in non-visited color, it may be due to a page cache issue or maybe part of your history has been cleared.

Shal


--
Help: /static/help
More Help: /g/GroupManagersForum/wiki
Even More Help: Search button at the top of Messages list
How to Include Message History on Group Home Page

 

Hi,

I've newly transferred my group from Yahoo. I notice that some of the home pages here include message history charts with a list of number of messges per month per year and some don't. How would I include that listing on my own homepage?

thanks.?

Linda
Re: redirect when uploading to group

 

Tried to upload a few files to my group, but get a redirect to > myweb.accessus.net and says can not connect. Then when I cancel and go back to the group, all of the "buttons" show link to that site. Only way to get back to showing groups.io links is reload page.

Have no idea if this is what site is supposed to do.

Thank you for any and all help

Odd. I just uploaded a file in my test group. I am using Apple macOS 10.15 and Safari browser.
No problems.
I went to files, clicked on upload file. Used browse to find the document on my computer. I tried with a PDF. Clicked on Add. Clicked Notify Members. All right as rain.
Just uploaded a .docx. Since I have a Mac without Word, clicking on in the files area, it downloaded the document. Opened fine. The PDF opens in the browser.
I don't know what to suggest! Perhaps someone else can tell you, but it doesn't look like a Groups.io problem but perhaps your network?

Frances
--
FAQ on Moving from YahooGroups
GMF Wiki: (unofficial) Help for members (and would-be members) and group managers
Re: Transfer Status

 

Parts of that story from Yahoo are kind of right, but you might want to read Mark's own account of groups.io, which has been live for just over five years now:



I don't believe he's doing this to cash out any time soon.

Bill

On 10/24/2019 7:59 PM, CushmanGroup wrote:
Don't know if it is true but on Yahoo it is said the current owners of groups.io were the previous owners of egroups which sold out to yahoo to form yahoogroups.? That was a good sale because egroups sold to yahoo for $432 Million.? I suspect if groups.io gets pumped up over 24 months from an unknown site to a yahoo replacement , they can sell for in the range of $125-150 Million.
A solution to identity issues is to purchase your own domain name and point it to what ever forum you wish. since you own the domain name and if you use correct domain settings they only thing the visitors will see is the domain name.? That is what we did.
I expect there will be competitors in this market popping up in the next 12 months.
redirect when uploading to group

 

Tried to upload a few files to my group, but get a redirect to > myweb.accessus.net and says can not connect. Then when I cancel and go back to the group, all of the "buttons" show link to that site. Only way to get back to showing groups.io links is reload page.

Have no idea if this is what site is supposed to do.

Thank you for any and all help
Re: Limiting Transferred Photo Resolution

 

Hello Duane,
Is it possible to do this after a group is transferred? Example after a group is transferred to IO you see total total data footprint on IO exceeds the group type ie: free vs premium max data allocation by some manageable amount.

Could the 'Max Size' then be run to reduce the total foot print of the group to bring it under the group type size max?

If so this could be a way to reduce data used without actually deleting any photos.

Thanks,
Charlie

On Thursday, October 24, 2019, 9:17:56 PM EDT, Duane <txpigeon@...> wrote:


On Thu, Oct 24, 2019 at 08:15 PM, Larry McDavid wrote:
Is it possible to control the file size of transferred photos by limiting and re-sizing the resolution at the time of import?
Yes.? Before the transfer is done, go to the Settings page, scroll down to Features, a little further to Photos, and set the "Max Size In Photos Section".

Duane
--
Help: /static/help
GMF's Wiki: /g/GroupManagersForum/wiki
Search button at the top of Messages list
A few site FAQs: /static/pricing#frequently-asked-questions

Changing paid plan

 

Yes, it's my own fault.? I signed up for the one month plan and then found I needed to sign up for the 1 year plan in order to do the transfer from my Yahoo group.? How do I change that?

Cecelia Mercer
[email protected]
28561 - 28580 of 49118