开云体育

Thanks, Brendan.? I'm confident the cable is bad, but your recommendation about checking the board for corrosion and bad joints is good.? I'll do that, too.? Thanks, also for the lead about

Mac….I hope it’s Mac it’s hard to tell ?you really need a name in signature. ?Just makes it easier to be a bit more personnel in replying. It’s kinda unusual to have a bad HC pin/cable ?

Thanks, Brendan, I didn't even notice your attachment.

Mac i posted a jpg cct of the HC above. ?Sone many years ago, not by me pin 12 is Left LD which loads the left display with serial data characters. ? Since it’s bad and data overflows from left to

Hi folks Join us LIVE for the first livestream of Losmandy's podcast Live from Burbank California April 13, starting 1PM pacific Our first livestream! We have a special guest Anthony Quintile, who has

Mystery is likely solved.? I got my multi-meter out and found pin-12 is intermittent.? I haven't been able to find a pin-out for the Gemini I hand controller, so I don't know what signal pin-12

Ah but which colony? In USA Michael Herman is the guy who does repairs, and in Oz Bren Smith is your man. D. Sent: 05 April 2022 00:20 To: [email protected] Subject: Re: [Gemini_users_io] Gremlin

Oops, I thought the G1 and G2 forums were separate. Thank you, Brendan.? I have no idea what version of Gemini I is, but I'll look the next time I'm at my observatory.? I have the stuff to clean my

I'm in the Colonies, but if it needs repair, shipping both ways would be worthwhile.

Hi remember no need to cross post between forums for help. Want to ask which version G1 you have ( https://gemini-2.com/pcb-pictures.html ) as some had fuse " F2" an "X14" (

Where are you based? If in UK, I repair Gemini-1 systems here. See: https://gemini-2.net/G1-repairers.html Cheers David Sent: 03 April 2022 13:26 To: [email protected] Subject: [Gemini_users_io]

I have a Gemini I L4 which performs well except for the hand controller.? For a few minutes the HC acts just like it should, but eventually it starts to display gobbledy-gook and shortly afterward it

Hi Paul, Gemini G11 version 1, level 4 1.05. I'm currently running 1.0.75 drivers. I’ve had the same occur in both settings I’m pretty sure. Powered on in parked mode, and connecting driver to

Losmandy performed a timely non-warranty repair of my motor encoder, which I blew. Last week I felt really bad about this step back, but now things are looking up....and I don't have to explain to my

It looks like my USB serial port ( COMS 3) is working it shows up as the window you have provided and i go on drives and they say they are up to date. The other end of the cable is the small phone

Hi David Thank you for your reply. I have had this set up from new, bought many years ago, but not used a great deal over the time. I have been using my Mead LX200 for many years for visual observing.

A nasty thought occurs – did you buy this G-1 2nd hand? If so do you know if the serial port actually works? I can test and repair if necessary. David Sent: 18 March 2022 10:28 To:

Thank you for that info, will have a look later. Unfortunately I don’t know anybody who could make me one. Thanks Ken Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________

1. The RS-232 adapter should be full voltage range RS-232 not logic level which a lot of them are. 2. How are you wiring the RJ22 4P4C plug? Sent: 18 March 2022 10:28 To: [email protected]

Hi Ken, First, you should see if you can find a serial COM port on your laptop after connecting the converter to it. It should show up under Control Panel->Device Manager, something like this (it