开云体育

Graeme has some good input here It's usually small things that are right on the edge Make sure your Gemini and computer have the same time/date/location coordinates (computer = software settings) Set

It usually means that the mount isn't in the "window" for a flip to occur. This might be because the limits/goto limit aren't correct, or possibly if the CWD position or time/date are incorrect, or if

?Haha. Thanks Brian. Yeah, I have watched those videos and will watch them again - I’ll basically start from the beginning. Like I said, Gemini/Losmandy/SGP are all new to me. I thought that

Hi Andy That's not much to go on but check out these videos on exactly this topic: https://youtu.be/Rk8uOikHPb4 https://youtu.be/D522S9GIbGE https://youtu.be/W4O2XeJ5sQU Thanks Brian Brian Valente

G’day, I’m a new G11 user. I am, in fact, still relatively new to Astro in general. I just set up my G11 per the Losmandy videos, taking (I thought) great care to set safety limits and the flip

Thank you, Brendan and Brian.? I noticed Amazon's prices for the Techspray were 40% less than Grainger.? Yikes.? I'll get a smaller container of the brush-on stuff.? Thanks again for the

This isn’t an official Losmandy recommendation but I’ve used this with good results and it’s fairly inexpensive https://www.amazon.com/gp/product/B085G42TGS Thanks Brian Brian Valente Losmandy

And Snap On et al will never allow it as it is better for every customer to have to buy two sets of tools.. Derek _____ Sent: Sunday, April 10, 2022 5:52 PM To: [email protected] Subject: Re:

We will never drop metric units as it’s the basis of SI units International measuring standards. It’s a real pity sticking with older imperial. ?What was worse was the British version of imperial

Oh sorry I use cheap stuff ! ?What ever onsale. -- Brendan

Just use the Acrylic sprays. ?Silicon conformal is too expensive for non pro stuff aka this is for avionics of naval electronics. Cap any sockets snd plugs before use. Indeed I wouldn’t spray ICs

New cable is here and Gemini seems happier.? That Conformal is expensive stuff, at least I have two Gemini units to treat with it.? Is there any difference between the Techspray, the MG Chemicals

There’s a bag of assorted screws in the Losmandy store that should have what you need: https://store-losmandy-com.3dcartstores.com/sos-kit--replacement-screws-and-wrenches-for-gemini-1-and-2.html

Sorry I forgot to provide a link to Gemini FAQs ( https://gemini-2.com/faqG1.html ) as this is a great wealth of self help that may assist you.? Site is a little clunky to use but you get the gist.

Ok we are lacking information.??? What version Gemini 1 or 2 or mini? What connection are you trying LAN/RS232 to USB or USB? If using an RS232 to USB what version converter as some chipsets are

Now sit back watch the flame war! *** When is the rest of the world gonna drop the metric system?? :-)) Derek _____ Sent: Saturday, April 09, 2022 7:58 PM To: [email protected] Subject: Re:

Well blow me down with a feather...there is a database in this forum for such things ( /g/Gemini_users/table?id=6040 ).?? Unpopulated ...so maybe I should volunteer to do it. They

Hi Bob 4-40UNC X 5/8 inch hex head (

My computer will not send commands to my Gemini Losmundy mount to move the telescope, when using Gemini desk top App and NINA But when i use NINA on my la[top it will send information to my Gemini

Hi all, Some how I lost a screw that holds my Dec motor in place in the housing/gearbox. I need to get a replacement, but don't know what size I need. Thnks.