开云体育

Enter UTC date time in this format http://www.docgoerlich.de/utcdate.php cheers -- Brendan

Hi Michael, As always the best advice!? The way the data has to be entered is routinely entered with American assumption that the notation is USA style. Your advice as always is read the manual. --

Hi Gary, The best recommendation is to avoid daylight savings time issues by: Set your timezone offset to zero! As if you lived at Grennwich UK. Set your date and time to UTC, using a web app like

Gary, If I recall, the time and date on mine were in weird format. I’ll try to provide you the time ad date as inputted when get home tonight. Luke Sent: Friday, May 20, 2022 2:04 PM To:

Maybe it's me or there's really something wrong with my Gemini I system.? I go through all the steps for location, GMT and so on but when I try to go to an alignment start it's so far off that it's

All, Losamandy should add Michael to the payroll. Michael actually called me and walked me through each step of the disassembly, purchasing the right tools and grease, and back up to running again.

Hi all, Quick update....all solved. I spoke with Luke. His Gemini-1 hand controller was set on Photo mode, and he was pressing each diamond button ...did not see any movement. Thats usually half

Luke, When you say you pointed the telescope manually do you mean you pushed the scope by hand? Paul

Probably too little information to make a diagnosis Maybe check and replace battery reset SRAM and re-input settings. ?Start over again -- Brendan

Any Idea what is wrong with a G-11 with Gemini I that will not slew? I broke the dec drive on my larger mount on Sunday and ended up hooking up my retired G-11 with Gemini I. After turning on the

Kevin, this sounds like your cable is bad. Can you use your voltmeter on the Gemini-side of the cable, with the cable unplugged from Gemini to see if there's 12v across either of the 12-18v pins and

Moved this into a separate topic from Recently Acquired G11 with Gemini 1: Can't power up the Gemini (

Hi...wondering if a couple of these replies are actually for a different thread?

Encoders can go bad by themselves but usually someone plugged it in wrong putting motor drive to encoder line killing it. ?Easy enough to replace cut the legs log off old body and disc together

Thanks, Bren. This briken G-1 sent from its new owner has: A god RA motor goes into a runaway RA motor (motor is good and cable is good, used on my good G-1 to test these). Kit from owner included a

Oh make you can make up a pwr tester to see if pwr is arriving at the Gemini sockets. ?Just a resistor snd LED?in series. Plug this into the spare pwr socket (positive pins lhs as looking at the pwr

Damn posted before I finished. ?Try these, get back I don’t have my lappy to post power distribution diagram but will get it tomorrow. ?(In hospital again) cheers -- Brendan

Hi Kevin I agree it look peer isn’t arriving at the gemini if you plug it in to the power socket on the Gemini you can measure the spare power socket as they are in parallel. ?The 2 left pins gnd

Welcome to the group Kevin. Your power supply for the Dob running 12v should work.? Since you have a voltmeter it probably has an Ohms (resistance) setting or a diode test setting on it that will

Hello! ? I am new to these boards from the Bay Area of California, having recently purchased the entire collection of an accomplished astrophotographer including a beautiful Takahashi refractor, a