开云体育

I had a time where my mount would disconnect once a month, then once a week, than once per night, most of my Astronomy is done remotely from the garage. I was a the mount one night doing a polar

I don't know if anyone suggested it, but you could consider doing a factory reset. https://youtu.be/j8DVEvnlBYI Also, at least excersize your connections. That is simply unplug and reinsert your USB

Hi Ron Thanks - your versions of everything look fine, i would not fiddle with those right now Couple things: First, you should choose USB -or- Ethernet, but not both If you have both, i would stick

Thanks Brian for the help So I have both a USB to powered hub to computer and Gemininet via ethernet to pwered hub both connected and running at the same time and usually without error messages ( but

Hi Ron a couple other things If you continue to get comms timeouts, you might try connecting the Gemini directly with your computer's USB port just to eliminate the possibility the hub is causing

Hi Ron Gemini Telescope.net is only up to 1.1.1.0 Check the About item from the Setup menu [image: image.png] [email protected]> wrote:

Sorry PaulV 1.20Ron? Sent from the all new AOL app for iOS

Thanks Paul for your responseGemini 2? Funny I’m listening to it now on my windows PC and invariably proceeds to a “command time down”.?The Gemini status pops up but guiding continues goodI

Hi Ron, Communications error is usually a timeout error on delivering a command to Gemini. It's an indication of a poor or noisy connection, bad cable, or sometimes a poor serial/usb/ethernet or other

Hi there, I'm Having some issues with my Losmandy Gemini 2 control board. When I power up the controller I get a message saying that there's no SD card. I've tried changing the SD card but still get

Can somebody explain to me the sources of my reoccurring ?“Communications error” I get a pause in my PhD but things will resume just fine, stacking continues … nevertheless I get intermittent

Hello Paul, My old gemini 1 power supply recently failed and Losmandy had none in stock. I solved the problem by using a PC power supply but I had the same problem as you to connect it to the Gemini

Here's a USA source for the 4-pin DIN power connector for Gemini-1: https://www.mouser.com/ProductDetail/Switchcraft/09BL4MX?qs=iwvYsH9bSFaxhBp8gtZgnA%3D%3D And in Australia:

Hi Paul, Should you decide to build your own:

Hello all, I have a Gemini 1 controlled Losmandy G11. For reasons unknown, my power cable has gone AWOL. Losmandy has none in stock so I’m going to have to beg, borrow, steal or fabricate my own. If

HI Alex You can try the star cross test tool in PHD to see if your mount is responding in all four directions If it doesn’t move, then you need to investigate the mount connection, possibly the

Hello I am a new Losmandy user and I am having a reoccurring error where during the calibration step of PHD2 it fails with the error "mount moved" or something like that. The mount is connected with a

I went through the logs with a fine comb and couldn't see anything that would stand out as an issue; however one thing stood out that was strange. My Voyager software logs showed a park command issued

Slewing to Home position before parking was part of a script routine I was running. I'll remove Home slew command and just run park command. I will collect the logs and share on dropbox if you wish to

Derek it's in the files section here in this group /g/Gemini_users/files/Gemini%202%20Beta%20ware wrote: