My old gemini 1 power supply recently failed and Losmandy had none in stock. I solved the problem by using a PC power supply but I had the same problem as you to connect it to the Gemini 1. I solved the problem by using and brazing ?the cable and socket of my old power supply. On my Gemini 1 the socket was a 4 (not 6) pin DIN. The polarity was : il you look at ?the DIN socket on G1 the two left socket positions are positive and the two right are negative.
Le?ven. 21 janv. 2022 ¨¤?20:23, paul rapp via <p.w.rapp=[email protected]> a ¨¦crit?:
Hello all, ?I have a Gemini 1 controlled Losmandy G11. For reasons unknown, my power cable has gone AWOL. Losmandy has none in stock so I¡¯m going to have to beg, borrow, steal or fabricate my own.?
If anyone has an old or spare cable they are willing to part with, I shall be happy to pay costs.?
I am reasonably certain that I could fabricate the cable myself. Misfortunately, I don¡¯t have a wiring diagram or the part number for the Gemini end plug. It appears to be a 6 pin DIN. If this brain trust could supply me with said wiring diagram and part number for the plug, I would be most appreciative.?
