开云体育

I don't want to veer off topic but mine "times out" at the "Flash Firmware" and "Reboot" step when using the GFU every time I try to update the firmware.? From past messages, I think the issue is

A timeout at the end of the process, after Gemini is rebooted, is not a problem. It's just that it takes too long for GFU to detect that Gemini completed the reboot, which could be a network problem,

You could try this to update the HC without using the GFU (just in case something is wonky with the GFU utility).? You will need to copy the V1.64 gemhc.bin file directly to the HCFirmware folder on

Thank you a lot Paul and Ryan, I had a looong night, playing with patches of clouds when finally everything crashed (gemini driver, sharcap and phd2) . I suspect a collective software suicide due to

1. As Ryan suggested, restart Gemini. 2. Make sure the HC is plugged into the correct slot. 3. Try doing the update to HC firmware again (select HC and Flash Firmware in GFU). Wait until it says it's

It feels like we have been waiting for GEMPro for a very long time.? I'm very curious to see how much of an impact it can make once the hotrod PEC curve is installed on my sort of average G11G and

Did you power the mount off and on with the switch after the firmware update was complete? When you power cycle the mount for the first time after the firmware update is when the Gemini pushes the HC

*[this has been solved] see my answer three messages below* *The issue resulted in several causes I guess* * *data corruption, possibly due to a low lithium battery voltage due to cold conditions?

Yup, upgrade worked great for me as well! This is a great group. Thanks for all your help everyone! Now waiting on GEMPro to come out :) Jason

Easy Peezy me too thank you so much Paul for all of your work

Flawless update here.

PEC is stored on Gemini SD card in PEC folder in the CurrPEC.pec file, so it will not be erased by firmware update.

Don't know what happened, Chip. I've updated HC firmware with GFU to 1.64 without issues, and I kn

On Tue, Mar 18, 2025 at 03:41 AM, Paul Kanevsky wrote: > > Hi folks, > > New Gemini firmware ( https://gemini-2.com/firmware-changes.html ) is > available to address issues reported by users. > >

Will PEC be retained when completing the update?

Thanks for the update, Jason! You’re all set. Regards, -Paul

Just updated to the latest Gemini firmware as well. Working as expected. Looking forward to "GEMPro" soon :) Jason

Paul, Everything worked great and the server firmware is now updated. I made my own custom cable to connect the programmer to the smaller connection in my Gemini. Worked like a charm.? Also, the

Chip Thanks for the clarification on PA. But I'm now familiar with the push DSC Chuck

Chuck, To be computer free you will need to use the traditional optical polar scope to PA.? You cannot use the NEXUS DSC for polar alignment. But not to worry there will always be a Losmandy polar