开云体育

On my following the directions for the Flash step, the processes returned this: These messages look different and I'd like to assume it did program but failed on some later issue.? As the mount

Hi Michael, That's kind of weird.? I've been using a full house ASIAIR Plus 256GB V3 hardware system with a very recent, possibly still the latest ASIAIR firmware and app. V2.3.1 build 814.? I just

Hi Michael, The only thing I can think of is to check for RA and DEC reversal settings under mount gearing after a firmware upgrade.

Chip, I'm using N.I.N.A for imaging software with PHD2 for guiding.? Here is my imaging setup GSO RC10 f8 @ 2000FL ZWO Off Axis Guider with ZWO ASI174mini ZWO ASI2600MM Pro Imaging Camera Let me

Greetings, To help see the "elusive second star", after aligning the Cassiopeia and Ursa Major constellations in the reticle to where they are in the sky, adjust the mount so that Polaris is within

Hi Michael, What does your main imaging and guiding hardware setup consist of?? Are you guiding with an OAG or piggyback?? There are many potential issues which ones to consider depend entirely on

In a Bottle 2/3 area these are very easy to see targets.? Just remember to get the mount reasonably well aligned before you try to PA.? Use a phone GPS app with a compass and remember to use true

Thanks.? Yes that is very helpful.? It was my hunch that in my 5 bortle skies and doing it too early in the evening was the reason I wasn't seeing it.? I'm hoping to do a session tomorrow night at

A lot depends on where you are observing from.? You'll never see the 2nd or 3rd stars if observing in the city.? The first star is Polaris a bright 2nd mag star, Polaris should be the obvious bright

I'm starting to get the hang of the Gemini 2 / G 11 but in the half dozen or so sessions I've had so far I've simply been unable to find the elusive "second star" in the polar scope.? I'm a visual

I have been operating my Losmandy G11 using the original Level 6 release in since about mid-2023 without any issues that I'm aware.? But after upgrading to telescope to a longer focal length, I

Chuck, I’m sure you will receive lots of good advice from members on this forum. I have taken the path of using ZWO cooled cameras (for deep sky objects) and un-cooled cameras with high frame rates

I also have a C14 on a G11. They are great but not perfect by any means. I have a hyperstar system. I use this always. I have it paid with a DSc10TEC. I'm by no means know what I'm doing,? only by

It should boot noticably faster. -- Chip Louie Chief Daydreamer Imagination Hardware Astrospheric - South Pasadena, CA Astrospheric Signature (

Sounds like it was updated, Ken. The main thing to notice is the faster boot time. From the time you flip the power switch to the time the HC is initialized.

Ignore, it was just that RA/DEC cables were not plugged in when the upgrade happened. > > > >

Hello again! Didn’t mean to sound like I was pouting my way out before. I honestly wanted to make sure I was prepared to answer the questions folks had, and running our observatory isn’t as big

One other thing. Has anyone had any ticking sounds coming from the unit (Gemini-2) afterwards? Mine now ticks every second or so. Thanks, Ken

My upgrade appeared OK. Is there a way to double check the new bootloader is actually in (apart from the Keil OK and Finished messages)? Thanks, Ken

As always, thanks.