¿ªÔÆÌåÓý

  1. Gemini-II
  2. Messages
Single Messages Topics Expanded Polls

Re: PemPro and GM811

 

Thanks Ray - so, I have logs from the PEC off and PEC on runs. To me, it looks like this did the trick?

This time, as Ryan suggested I used my imaging camera on the main OTA.


On Sun, Nov 24, 2024 at 9:13?PM Ray Gralak via <iogroups=[email protected]> wrote:
>
> So, I did those steps however, I am a little confused about step 4. In PemPro, I enabled PEC and then started
> another data acquisition for 2-3 cycles. However, I really didn't know what to look for in that screen so I instead
> started guiding in PHD2 and that's what I used to evaluate the results. I did try inverting the curve but it still
> seemed to give same/similar results.

The easiest way is to create a PEC curve on the Analyze tab and compare the amplitudes of the frequencies with PEC ON to those in the original log with PEC OFF.

-Ray







PEC-On-PEMPro-2024-11-24-211949.txt
PEC-On-PEMPro-2024-11-24-211949.txt
PEC-OFF-Imaging-Camera-PEMPro-2024-11-24-203249.txt
PEC-OFF-Imaging-Camera-PEMPro-2024-11-24-203249.txt

Join [email protected] to automatically receive all group messages.