开云体育

pdf file on conversion

attached

The following files and folders have been uploaded to the Files area of the [email protected] group. * /Conversion of pallet with twin amplifiers with SAT2T21H450W19S for use at 13cms.docx (

Jim Smith (

The following files have been uploaded to the Files area of the [email protected] group. * /DSC02971.JPG ( /g/G7NTG23cmsPA/files/DSC02971.JPG ) * /DSC02972.JPG (

My latest 2.4GHz amplifier project using a pallet from bisonelectronics-sp2iyr on Ebay and modified to give 75-80W from a 28 volt supply at 15 amps max and a max drive level of 250mW. P1dB is around

all gone

I have a few of these pallets with 2x BLF8G22LS-160B V available as received unmodified at ?60.00 + postage if you want one/some then email me thebigclunk@... ( thebigclunk@... ) I have

https://www.ebay.co.uk/itm/203153696366

https://www.ebay.co.uk/itm/203153608046

https://www.ebay.co.uk/itm/203149052635

virginmedia G7NTG com

thebigclunk@...

This is a W6PQL based 150 watt linear amplifier with 2 stages of driver amplifiers , primarily intended for DATV but will be ok for all modes. It has high gain, needing only 20mW for full power. 55dB

this one is sold. I will start on the next one soon.

2.4GHz 160 Watt Linear Amplifier Es'Hail DATV 45dB gain 2 x BLF7G22L-130N (copy and paste on ebay)

Hi Jim May I suggest telling the group that Andy G4JNT ran two Design Notes in Radcom on buck and boost converters. Jan and Feb 2017. In the Feb edition page 36,? he aimed at producing a boost

price depends on quantity

A lot of people tried to contact me about the 23cms PA partial kits but did not email me direct as I requested so I did not see their requests. It might be possible to order another batch of PCB's so

it's probably easier to start with none of the tuning pads linked at all