开云体育

Amazon.com: Zerone External S Meter SWR Power Meter Receive Display Meter for Yae su FT-857 FT-897 : Electronics (

Thanks for the reply I found the instructions and yes it is a Chinese knock off... as of now it works fine with swr setting but will calibrate it later..73 Russ ???Russ Ouellette rjo601@...

Look up the information on the LDG forum in the files section or Google it. The one on Amazon is a cheap Chinese knock-off of the LDG unit. The operations manual also has a section on it as I recall,

Russ, Can you give us a link to the Amazon item? 73, Cameron?

Sorry I have not replied... The swr meter is from Amazon.com. I believe it is a setting in the Radio.. but can't adjust the meter for 100 watts. for full deflection.... there was no instructions that

The power/swr meter is from Amazon.? No instructions came with it.? How ever I did follow instructions for the FTL? model ? and it needs to be calibrated for the FS mode.... but there is no

No tweaking on my part but, I'm not the first owner! Guess I'd better recheck so replacing finals is not in my future. Ted

Ron, After troubleshooting, I think you might be right.? ? I found a bent pin on the cable which may have shorted out the input voltage. Trying another cable yielded no power up of the tuner

While the metering might be incorrect the radio could also be putting out higher power. If it is putting out too much you should set it to the proper output or just figure for a dB extra signal you

Actually, there should be no output on SSB until you talk or supply some other form of modulation. AM isn't rated at 100 watts, it's only rated at 25 watts. Check your settings, it sounds like it's

I think your wattmeter may be lying to you, check your O/P against another meter and of course a dummy load. My 857 is 15yrs old and only puts out 100W, unless you have tweaked

At the 100-W setting my meters tell me my 857 typically puts out about 120 watts. If The maximum capacity of Russ's meter is 100 watts this could explain why it's pegging at the 100 watt setting. Ted

Hi Russ, First question is what sort of power/SWR meter is it? That will determine how to use it. Please let us know the make and model? 73….Eric VK2VE. Sent: Wednesday, 13 July 2022

Check the diodes. John VE7KKQ [email protected]> wrote:

It sounds like you have the meter settings wrong in the radio. Follow the instructions here and see if that helps. http://mirradio.ru/manual/FTL-MeterManual.pdf Randy (KE5EOT) ARRL, QCWA, ARES,

Dear Russ Insert a 10 K potmeter in between the meter and rig. I am using it like that VU2TE Unni [email protected]> wrote:

I have a swr /power meter that when you set it to power and key the radio the needle goes off the scale. At 1oo watts when I lower the power it goes to that setting... how can i set it to 100 watts on

There is a fuse in the radio that will blow if you don't hook up to the tuner correctly and the tuner won't tune ( If you are powering the tuner thru the cable from the radio's 13.8v) when its blown!

Hello all, It looks like the Radio to Tuner DIN 8 pin cable is broken. Can anyone advise a replacement?? ?I think DX Engineering has one but wanted to verify its a correct replacement for the shorty

Thanks. Your response was very helpful 73 art N2AJO