开云体育

If I remember correctly the older post on this,the free version did things that will harm the memory locations. Yaesu used a type of chip that can only be written to a certain number of times then

Hi Nick Well, that fixed it. When starting out with a radio like this with many menus, I am not surprised that I selected that feature by accident... That saved me a reset and reload of all

That's the problem. In the HRD customization screen, there is no choice (for exampe) to assign a button for 2.3 KHz filter, 500 Hz filter, and many other useful functions. The Yaesu manual only

You need to customize the radio panes in the main, logbook and DM780 Screens. You can add or delete buttons, drop downs and sliders from within the customization screens. If you haven't done so

Hi Paul. I have been an 857 user for a few years and had very few operational issues for ages. Suddenly I started to experience that tone on VHF. Took a while but eventually I found that the old

If your referring to the tiny fuse about the size of a 1/8W resistor, they are called pico fuses and they are available on Ebay and many electronic stores. There is a tiny resettable circuit breaker

I have been using a very old version of HRD, and recently bought a license for the latest HRD to use with my 857D. With the new version I don't have as many defined buttons. I assume there are

I am a relatively new FT857D owner. I have successfully used RT Systems software to program the radio, so I don't have much experience with menu setting from the front panel. I recently have had

Hi anyone know where i can a replacement 3amp fuse to suit 857d for the v+ outlet on acc jack ie so can run bluetooth dongle. I accidently short circuited mine. No auto reset. Is there an equiv with

Various LDG models function differently hence may be an explanation for some of the different reviews you get. I use my PROII without an interface cable. Put on AM to get carrier and it tunes on

Larry, MFJ, LDG, Palstar and others have auto-tuners that sense the RF and tune accordingly. The Cat interface is convenient in that it tells the tuner that the band/frequency has switched before RF

Larry, ?The LDG YT-100 uses the cat port but provides a cat port for your rig control. so you won't be loosing anything. Yes you can use an MFJ 993 B autotuner without using a cat port. it will

Anyone using A non CAT controlled AUTO tuner for the 857D? I currently have the CAT on the radio tied up with DXLAB software for rig control. I have an manual MFJ tuner that I have owned for

You have stripped the thread Ken so I am not sure if you are responding to me or not. If so, I did not try the 1.9 version. I went from 1.8 to version 2.0 and it did not work so I just went back to

Did you mean 1.9? It is the current release and works on my system with Windows 10. V2 will not be fully released until January, and yes, it's different and the betas still have bugs! Best wait and

Use the version 1.8! I just found out today that the latest version 2.0 works different. Would not work for me. I went back to 1.8 and all is good!

Hi Cliff, I just got my 857D going on WSJT modes and it works fine. I don't have a Signalink, just a home made audio isolator and a CT62 cable for CAT control. I found this web site useful for the

http://w7hd.ddns.net/fldigi/ft857-menu-settings-digital-operation.pdf

Good day all. I have tried 12 ways from Sunday to get my 857D to connect with the WSJT-X program via Signalink so I can do some FT8 and WSPR work......but without success. Toshiba laptop, Windows

Thanks for the info! But i found "Does not ship to Sweden" note. Sorry... 73 de SA0PRW Den ons 14 nov. 2018 kl 21:13 skrev la6yja@... [FT-857] < FT-857@...>: