开云体育

Just to be sure I'm clear, I meant to physically visit the location of the seller and see the equipment in operations. Also, paypal is my friend. LOL One other thing to check is the seller's feedback.

You’re spot on, except that #5 should be “1 or more.” The imaginary equipment can just as easily be sold multiple times. No reason to disappoint the second or third willing buyer. -Les W6VN

Anyone can offer a working mainboard from scrap FT-857?? or just MCU? I know I am asking too much :-), but I have to try.... tnx...Kristian

Obviously you completely spaced out the part where I said I would only do this if I could visit the site first and see the equipment and pay in cash. Please don't insult me again,

[email protected] to gullible list, check! > This same scam had been sent through this list before with the exact same pattern. 1 pick a tech license to imitate that has little or no online

I feel the Morse character gen is not musical. Only adjustment available is the weight and dot dash ratio. Of course One can use an external keyer like K3NG (which I tried) and so. I am using HRD last

Yes you're right. It never hurts to be very very cautious. Here's a thought along those lines... If they're selling everything why isn't there an ad on Ebay and on Craigslist? Something like this I'd

Scam comes up every so often. Lots of high end stuff and want to get out of the hobby. Almost always an Elecraft in the mix. Have reasons not to take Paypal. Make a better deal if you deal direct.

Seriously Chris? This is a classic scam. Very obvious. Steve KA9MOT FT-857@...> wrote:

I looked up the license number and it comes up as Roberto Miranda and just because he's a tech doesn't mean he doesn't have enough money to buy the stuff in the first place. There's any number of

SCAM !!!! This is cross posted all over the yahoo groups with different names. KJ6SUB does not have a QRZ Email address and is a TECH. I bet he doesn't know he has all these goodies... Mitch N4MF

Flex-6300, Icom IC-7600, Icom IC-E2820. Yeasu FTdx3000 and FTdx 5000mp Elecraft kpa 500 & KX3 ACOM 1010 Dipol 2X17m 9m up 500Ohm ladder line Tuner Palstar AT1KBAL, Fritzel FB13 Dipol 20m 15m 10m up 9m

Sounds like your finals shorted out.? You will need to either open it up and find the short or send it in for repair.? You should contact Yaesu tech support next. Ron W7HD -- Ron W7HD - NAQCC#7587

You seem to have a short in your radio! My thought is the power supply senses too much current demand from radio and shuts down, then it resets attempts to again and once again shuts down

Clean the fuse clips that connect to the fuses and replace the fuses at the same time. Common problem with these type of fuse holders.

by too much power, i placed a power meter on the leads and the power dropped to almost nothing then back up to 13.8 v then down to >1 v. l get 13.8 v continuous when i connect up any other equipment

What sort of value of "too much power", Andy? Would the current be similar to the normal current under Transmit condition? After checking the DC lead and fuses as already suggested, check anything

As N4MF stated, I would start with checking the fuses and fuse holders. If that does not reveal the problem, then look at the components upstream until you find the culprit.?James B Stafford

Try turning Breakers off in the house to see what is generating the noise. ____________________________________________________________ Drink This Before Bed, Watch Your Body Fat Melt Like Crazy

Hi Andy, Check the fuses in the fuse holders. People had had various problems with them becoming unseated or loose in the holder. Mitch N4MF