I think he is talking about the baud rate from the computer to the TT4, not the over the air rate, which is pretty much always 1200 on 2m and may be 1200 or 9600 on 70cm.
Michael WA7SKG
Stan Laughlin wrote on 5/28/22 2:40 PM:
toggle quoted message
Show quoted text
Mine is 1200 on external signalink tnc on 857 & 1200 on kenwood ?D710 internal ?tnc.
It would seem reasonable that 1200 is a very good starting point.
Good luck.
Stan Laughlin
KG7LBP
On May 28, 2022, at 14:15, mikemm58 <mmcauley@...> wrote:
?
I think APRS works on either 1200 or 9600 baud. But it's been awhile since I played with APRS.
Mike
-------- Original message --------
From: AB9NN - Jon Kreski <jkreski@...>
Date: 5/28/22 1:05 PM (GMT-07:00)
To: [email protected]
Subject: [FT-857] Baud Rate For APRS #APRS
I am running APRSIS32 on a Windows 11 PC with a TinyTrak4 TNC connected to my Yeasu FT857d radio.? The TT4 I know is properly configured - I used it years ago.? The software needs to know the port and gives me a choice of 3 or 4, and a baud rate.? Where do I find the baud rate to use?? And how do I know which port to use?? Thanks - I am setting up an iGate in a rural area with no other iGates within reasonable distances.? Thanks!
_._,_._,_
Michael WA7SKG