开云体育

Thanks for sharing the meter info Floyd. The solution you came up with looks great. I have been trying to determine what to do about the meter in my Challenger. It works but a nice meter in there

On Thu, Apr 17, 2025 at 11:51 AM, Steve Bookout, NR4M wrote: > > I second the endorsement for the Tonno meter software. > Super flexible to use. > When I built my last homebrew amp, I came up with

Here's the one I used: https://www.amazon.com/dp/B07MSBN4LP?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 There are many others, slightly more expensive, listed on Amazon.? I've bought a few of these

Tom - correct on all counts.? I changed the shunt resistor from 33 to 1 ohm, 1% and used a 5k pot in series with the meter to calibrate the meter.? That pot is not in series with the meter when the

What is the mV of the meter? Let's assume it is the 75 mV 10 mA meter on Amazon. To read 250mA FS at 10mA the meter shunt of a 75mV meter has to be .3125 ohms. It is 33 ohms now. You are going to

I second the endorsement for the Tonno meter software. Super flexible to use. When I built my last homebrew amp, I came up with some great looking meter faces. I even added a ‘goat’ logo down in

Which meter on Amazon? Jerry NY2KW [email protected]> wrote:

While restoring a recently acquired Johnson Navigator transmitter, I was surprised at the very low quality of the stock meter.? It was completely undamped and of questionable accuracy.? I picked up

Sorry Dave. Can’t keep all my cousins straight! Mike

Correction....I am not Gary Harmon....I am Dave Harmon.....hahahah Glad to help out with the pictures Larry...uhh...kaff kaff...Mike!! Dave Harmon K6XYZ Sperry, OK.

Hi Donald, I spent a lot of hours tracing the wire numbers in the harness description page and finally figured it out. The “mystery” blue wire was intended to be there all along. I guess

Jesse . . . <jessadr1953@...> wrote: Is the radio intended for amateur radio? If not, since this group is for amateur radio, those who have this radio may not be members of this

Or maybe the drawing is a revised one and your model doesn't have the revision installed? Donald KX8K ---------------------------------------------------- Some ham radio groups you may be

FS: Viking 500 Beautiful Condition. $3500 OBO local pickup in Westchester County, NY My loss is your gain. time to downsize. It was completely restored about 10 years ago, including

I've been using these for a few years. They are a great replacement for the white pointers. Russ KW6T

Thanks for the info – I just ordered 10 from Amazon !! Mike / K5MGR _____________________________________ Mike Langner 929 Alameda Road NW Albuquerque, NM 87114-1901 (505) 898-3212 home/home

I recently purchased some Deutsch Sealing Plugs from Newark.com to use as pointers that were missing from knobs on my Ranger and Navigator transmitters.? I see that the plugs are now available from

I'm in need of one of the Buffer or Final tuning knobs with the 0-100 scale for the Ranger or Navigator.? Anyone have a spare they'd part with? 73, Floyd - K8AC

Alright Mike!!! Yep...as soon as you brought this up and I looked at the assy manual wiring and compared that to my 61' mfgd factory wired Valiant..... I knew that you had found an assembly

Hi Dave, The 4th lug from the front panel?on TS25 is actually lug 3 (numbering starts from the end nearest the 5V4 (XV20).? I built my harness from the schematic in the Operating Manual since my