开云体育

Alright Mike!!! Yep...as soon as you brought this up and I looked at the assy manual wiring and compared that to my 61' mfgd factory wired Valiant..... I knew that you had found an assembly

Hi Dave, The 4th lug from the front panel?on TS25 is actually lug 3 (numbering starts from the end nearest the 5V4 (XV20).? I built my harness from the schematic in the Operating Manual since my

Mike…. I looked at the assy manual….see fig X and fig A. There is no wire on the lug in question….but there IS a blue wire as I mentioned below. That is likely why you can’t find reference

Hey Mike….. I just happened to have a nice factory assembled 60’ model Valiant 1 on the bench for some routine maintenance. I looked at your breakout points and with P8 removed there IS a blue

Hi Folks, I could use your help! I'm in the process of re-kitting a Valiant I transmitter using the Valiant Assembly Manual. The Valiant wiring harness schematic in the Valiant Operating Manual

I’m about to begin modifying my Viking 2 for operation with the 6N2. The modifications on the Viking 2 seem straight forward with the exception of two things. Thing 1: changing out the VFO socket

I have resolved myself to modification of my Viking 2. The instructions in the 6N2 manual seem straight forward except the part where the V2 vfo connector is changed with a 9 pin Noval socket (and the

It's nice to hear about your Johnson gear. And I really like the picture. When I was a teenager growing up in NE Iowa we made a few trips to the FCC office in St. Paul for exams and also to Canada for

Is there any info on programming software and cable

Well since we've got no pressing technical issues,? here's something that might be of interest to new and old members alike. The EF Johnson Company was growing rapidly in the late 1950s and had run

Hello Jerry, You won’t normally see a bunch of traffic here. If someone has an issue, people seem to appear ‘out of the mist’. Back about COVID time, it seemed like I somehow wound up with a

Welcome, Jerry ! You’ll find helpful, friendly folks here. Among the rigs in my radio-overpopulated-shack are a Valiant and a Navigator along with a couple of Messengers converted to 10

I just found this group and subscribed so I thought I would say hello. EF Johnson gear has always appealed to me and I have fond memories of the Viking II I used as a Novice in 1970. I didn't own

MONTHLY REMINDER--Our Amateur Radio Groups Below are our amateur radio related groups. Some may be new enough there are only a few members. If one of those interests you, join it and give it some

Good morning Bob, That is exactly what I was after. I planned to use an external speech amp I already have and supply filament externally if necessary. The Thor unit has an output connection to

Hi Tom, I haven't done that combination but I have used the Clegg Thor modulation-power supply with a couple of transmitters that don't have one,? including the little Palco Bantam 65 and an ARC-5

Does anyone have any experience mating a 6N2 with the Clegg Thor supply/modulator? I’m trying to put a 6N2 on 6m AM for some local rag chewing and really not interested in modifying either of my

Still looking for an Invader (NOT Invader 2000).? If you have one to sell and are going to Dayton, here's your chance to sell it without having to ship.? Or, I might be willing to come and get

Jeff, If you use a lathe, be careful.? The aluminum of the cap is 'dead soft' for forming and about any type of tooling you use will grab the can with really bad result. 'If' you could mount a

Thanks, Don. I used wide metallic aluminum tape for the cover.? It would have worked perfectly had I done a better job of cutting the can. I used a tubing cutter and I anticipated the ratty result