I acquired a Ranger this past weekend and just got around to taking it out of the cabinet.? I noticed a problem that I've seen in photos of several for-sale Rangers lately? - there were only three screws holding the power transformer (the rear screw towards the center of the chassis was missing).? As a result, the remaining mounting tab on that side of the transformer has been bent a bit and the transformer leans just slightly towards the side of the cabinet.? This is a factory wired unit, so I assume that the screw was originally there, but that might not be true. If the screw were missing and you shipped on of these units, normal handling by a shipper would likely result in the transformer tab getting bent like mine.? Replacing the screw is probably impossible due to the location of the accessory socket on the rear of the chassis and all the components associated with that socket.? Any comments?
?
73, Floyd - K8AC
Floyd - K8AC