开云体育

I have a Busy Bee and 10 mm 3/8" is maximum for premium

A 1/2" shank is about as big as you need on smaller mills. You may be able to use a 5/8 endmill with a 1/2" shank. I have a couple in my stash, but not sure the smaller mills can drive them

I could get a different drill chuck adapter or ER-32 adapter, but as these work I won't spend the extra money on that.

Ca a change the arbor on either to make a matched set ? animal

I ordered my new mill with an ER-32 chuck and set of collets.? I also have a drill chuck for it and use that when I have to change bits a lot, like center finder to drill to countersink... The mill

I???? bought a set of MT2 Weldon shankendmills from All Industrial tool a few years back . I think it was a 5 or 8 piece set . WHen? traded that mill & holders for a nice Mig welder a couple

You can use MT2 collets as tool holders. LMS only has them with a 3/8-16 thread but you should be abke to find them with the M10-1.5 thread on Amazon or ebay. Amazon has an MT2 to ER25 collet holder

Forgot to mention the top of my drawbar was traded 1/4 20 so i got a 1/4 20 coupler nut put on the hammer?? side , saves threads animalOn 4/4/25 2:26 PM, mike allen wrote:

All Industrial HAS THE MT2 COLLET & ENDMILL HOLDERS THAT YA NEED? ( SORRY DAMN caps lock .)? Their stuff has been goog quality in my experience . I just traded my mill /dril that used those though

Bruce, Little Machine Shop should have everything you could possibly need. Doug? Yahoo Mail: Search, Organize, Conquer On Fri, Apr 4, 2025 at 9:05, Bruce via

Problem solved. It is like a bigger mill, unscrewed the draw bar a little and hit it with a piece of aluminum and hammer. It came loose. It is a #2 Morse with a threaded hole of 10X1.5 MM. the other

The manual on the internet archive lists the spindle as #2 morse. Looks like there is a drawbar, item 77 in the exploded view. H Gilbert [email protected]> wrote:

If it is like mine it takes R8 collets/chucks.?? Loosen the Drawbar a few turns and whack the end of it with a mallet.

I couldn't find that model number on the Harbor Freight web site - what is that machine? If it's a mill or "mill-drill", you may have received a wedge-shaped chunk of steel with the other

Thanks for letting me join. Picked up a Central Machinery model 47158 sold by Harbor Freight. What is the thread dimension of the draw bar and how do you release the spindle? Thanks, Bruce H.

Works in Yandex browser from the other side of the planet.

Worked for me on an Android phone with the Brave browser.? Bill in OKC? William R. Meyers, MSgt, USAF(Ret.) Aphorisms to live by:Good judgement comes from experience. Experience comes from bad

Aha! The files are accessible in the _DrillMill_ area; not the _minilathe_ section! Craig

Straightening out the confusion about these files and where they are. Seven of the files Dave mentioned are?already?right here at Drillmill at this

Can’t download or access tables???