开云体育

How hot? That would be kind of important. They will run warm. If you can lay your hand on it, and keep it there, it's probably not too hot. If you can't, it is too hot. You might try aiming a fan at

The 40°C is hot.?To find the temp you add in the room temperature to 40°C?So room is 30°,C plus 40°C then motor is running at 70°C or 158°F. Dave? Sent from AT&T Yahoo Mail on Android

Motors run hot in normal operation, there should be a name plate on every motor that states temperature rise.? As long as the motor stays cooler than that it's withing spec. Notes: temperature rise

I have a Harborfrieght Mini Mill and I noticed that the motor and spindle were hot to touch after 25-30 minutes of use in this current warmer summer temperature. My question is, is this a concern?

New spindle parts (May 21, 2021) Check dimensions this site does have drill press parts

It sells for $400.00 As mill it fill size that is not on market. It is larger than Mimi mill but smaller than other bench mill. Dave

??? ??? and it has High Precision & even is a Semi Automatic , sweet!!!!!! . no bayonet option ? bummer ??? animal

I have one of those (in red) purchased at least 20 years ago from Harbor Freight.? (They no longer carry that model.)? I basically use it as my main drill press; I have a Rong Fu RC-15 that's a far

https://www.aliexpress.com/af/zx50c.html Vendors and prices will depend on where you're shipping to.? My new shop is 11 time zones to the East of my California shop, there's a train depot in town

Approximate price?? ? ?Who sells it?

Since I sold my big RF mill, I've got my eyes on a ZX50C with DRO.? Something like this

The Big Red still manufacturer

Thank you I thinking the default was opening to all Dave

Hello everyone. Somehow the files section was restricted to owners / moderators. I thought I had changed that.? :( Not much point in a files section if we cant share files. So I changed it to

I use a engine hoist.If need to know how to sling the mill just find a manual for any milldrill there will a photo how to hoist.? After it ground you put on a moving cart . Dave Sent from AT&T Yahoo

My HF one already had a bolt hole... hung well. See time lapse here. https://www.instagram.com/p/ByLbbCVAYV0/?igshid=u091b4edbuz3

I want to add the manual for my Long Chang LC-30 but it doesn't look like I have the right permissions. Attaching here instead

I just moved my mill last weekend. I used an engine hoist. I ran a chain under the head, then up and then back around under the motor mount and up to the hook on the hoist. What I discovered was that

I looped a lifting strap around the head between the quill feed and the column and lifted it from above. hung just about plumb [email protected]> wrote:

I need to move my Enco mill/drill from one location to another. I was thinking of drilling a half inch hole in the column just below the top cap and inserting a hardened bolt through the hole with a