Re: Manual for Dalton Lot 2
|
Bart my son in-law did a couple of things and I started getting some emails
toggle quoted message
Show quoted text
so it may work now. Will look and see if I have an spare thread chart for a Dalton. You can also look in the file section we used to have a list of the thread charts there. Dennis -----Original Message----- From:
[email protected] [mailto:[email protected]] On Behalf Of Grey Pilgrim Sent: Friday, September 17, 2021 3:44 PM To: [email protected] Subject: Re: [DaltonLathes] Manual for Dalton Lot 2 I knew Dennis would know! By te Way Dennis it didn't work. you STILL are not getting my emails. On Sep 17, 2021, at 2:03 PM, Dennis Turk wrote: > > The gear that goes atthe stud position is the gear that goes on the > forward reveres shifter. The thread gear goes on the lead screw and > anything in between its just an idler. Usually the 72 tooth is used > as the idler gear on the banjo or gear mounting bracket. Dennis > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf > Of Ebay Boy > Sent: Friday, September 17, 2021 10:33 AM > To: [email protected] Subject: [DaltonLathes] Manual for Dalton Lot 2 > > > Hi, > > Has anyonegot a manual for the Lot 2 lathe? I've completely forgotten how to put the change gears on and what the configuration is to cut threads. Help much appreciated. A close up photo of the default wouldn't go a miss. > > > Marc A Bradley > Facebook.com/stiffstatues > > > > > > > > > Scanned by McAfee and confirmed virus-free. Find out more here: |
Dennis Turk