Re: Max & recommended shaft rpm
|
My rig gives me 287 rpm.? I'll have to find a smaller drive pulley.? I'm running an atlas jack shaft.? Haven't figured out how to mount the dalton shaft yet. Thanks for the info. L
On Wednesday, July 22, 2020, 7:18:17 PM EDT, Dennis Turk <dennis.turk2@...> wrote:
Hi Larry ? Using the Dalton supplied countershaft three step pulley Dalton ran there countershaft at 250 rpm.? This I believe gave a top spindle speed of 480 Rpm.? You would be safe at running your counter shaft at 350 rpm. This would give you a spindle speed of around 700 or a little more.? With drip feed oilers for the spindle bearings you can run up to 900 rpm safely.? Would not recommend running your Dalton spindle any faster than that. ? Dennis ? ? Sent from for Windows 10 ? From: L Leonard via groups.io
Sent: Wednesday, July 22, 2020 4:02 PM To: [email protected] Subject: [DaltonLathes] Max & recommended shaft rpm ? I'm ready to mount the motor on my Lot 4 (2050). ? |
