开云体育

Eric, I wish you had said something a few months ago. I had a great pair sitting in the garage for over two years and I couldn't find anyone to take them. I finally threw them out. Sorry. I never

No, but I could make them. I have a friend with a pair and he’d probably let me take measurements.

Any replacement for mids if I ever blow it? Guess just find a whole set and take out drivers and xo sell what not needed. I have 3 new woofers so it be mid ,tweeter and mid bass drivers I’d want one

Does anybody have a pair of DQM9 cabinets that they might want to get rid of I do not need the drivers. Im in SoCal thanks Eric

Having listen to and still do 3 pairs of Bozak symphonies which lack a real top end over 12k the dq10’s are much more open in voices and cymbal area and triangles. I never heard a sound out of piezo

The word bright is a relative term. Redoing the xovers is a good move especially with the type and age of the original caps. Contrary to most who claim that the piezo was the culprit for the harsh

Gosh guys aren’t they brighten up with stock mid range and tweeters. I redid the crossovers with clarity kept in order to calm him down a bit. I think the last thing we want to do is add any more

The oem Philips tweeter had a shroud I front of the dome to disperse the sound and reduce beaming.? That was nice.? Not in the KEF.

The T27A variants are newer than the T27.? Maybe a model change alone...who knows??? ? Mine are 4OHM.

Yep MB Quart it is. Over the years I've tried several different types. To date I prefer the now old oem's to them all. The newer crop has been more efficient. But that causes issues and may require

I have a set of KEF -?Audiodrive AD-T27R Tweeters. Any thoughts on using these over the T27A’s??

Blows away might even be an understatement lol. Btw, wasn't there a recent post about the factory tweeter and mid being mbquart?Sent from my T-Mobile 4G LTE Device

The KEF T27A tweeter blows away the stock Philips.? And, since it goes over 20K, you can discard the Piezo super tweeter.? The previous owner also came up with a radical crossover network based on a

Greetings from Ottawa....I highly recommend a Tube pre with a SS power amp. ? I am using a Yaqin pre into a pair of NAD 2200 that are bridged.? Amazing resolution and depth.? Highly recommended.?

And here's the schematic for one incredible sounding DQ. The t27 mounts to the back of the mid dome in place of the factory tweeter. I find this is done best by using the inner of two tweeter bolt

Here's a quick drawing of the schematic. Tweeter will be 8 ohms normal polarity if the inductors are run this way. The addition I made myself was returning the factory inductor #5 into the mix. It

Hi john, I was referring to one of the responses about using a t27 tweeter. You can just about remove everything on the board after cap 1, aside from the .8 and .2 inductors associated with the mid

Hi John, First off have you cleaned up the fuse holder and swapped the fuse? Try that as those do present issues. At a minimum polish everything with a good metal polish. Fuse included prior to

Hi, I missed something. What is this mod you are referring to? John Sent: June 9, 2020 11:24 AM To: [email protected] Subject: Re: [DahlquistSpeakers] Crossovers Hi

Hi George, I too have a pair of these. Mine were done by Beatty Stereo in the 90's, and I am sold on what they've done. It is the perfect tweeter for the dq's. I did a few things to the crossover to