开云体育

Hi Dave, Currently my bandspread will highlight anything I need on RTTY. I don't use RTTY anymore and primarily use FT8 as my digital mode. Is there a way to get the bandspread to only highlight needed countries for digi instead? That way if I've worked a needed country on FT8 it would no longer be highlighted if it's spotted as RTTY which frequently happens with spots that are actually FT8 stations. Clear as mud? :) Thanks 73, Don VA7ZT Virus-free.www.avg.com

Hi, I defined this sort in the "DXKeeper Advanced Sorts, Filters & Modifieres" window: First item: STATE Second item: Band Third item: Mode all three in ascending order. Applying this sort it seems the Band column is in plain alphabetical order within the same STATE, like 12M 160M 2M 40M 80M but I think it should be ordered like this 2M 12M 40M 80M 160M as it is when I double click the Band column in DXKeepers "Log QSOs" table. Or do I miss something? 73, Lui, DL6FBR

Hi Dave, Many times, especially during contests, I filter spots at the DX Cluster. One of the commands that ARCluster accepts if you want to only see non-US spots is the command: set/dx/filter Cty<>k If I create a macro to send this command to the ARCluster node station in Spot collector, it strips out the 'does not equal' "<>" and sends instead: set/dx/filter Ctyk which creates an error. This also affects many other commands as well. Can this be corrected? Jim - KR9U

The RBN or skimmer station k9imm-# is spotting all decodes regardless of band to 6m. Is there a way to filter this station out as a bad spotter? Many of the FT mode skimmers are horrible.

Any reason that should be grayed out? IC-7610

Does anyone know how to use the DXAtlas map with DXView. I read that DXView has the ability to use an alternative map. Will spotcollector work on the DXAtlas map? Thanks, Matt KQ4VY

I imported my log from N1MM I used during the ARRL DX contest this weekend, however I'm a bit lost how to get those bulk contacts then uploaded into LOTW/QRZ/eQSL/Clublog from DxKeeper. Outside of the contest I use the capture window and each contact I log is immediately uploaded. I used this reference to import the log from N1MM: https://www.dxlabsuite.com/dxlabwiki/ImportN1MM I also did get some errors after importing as well. How do I fix that before uploading? "Illegal - can't find country code for callsign TO4A and TO3Z: QSO's DXCC entity is unspecified. " Thanks, Tim

On my Win 11 Computer I have running: DXKeeper SpotCollector DXView PropView WSJT-X JTAlert They all talk to each other fine. If I enter a call in WSJT-X DX Call Box, DXKeeper instantly performs a lookup of prior contacts with that station and lists them. On my Win 10 Computer I have : DXKeeper (only when Win11 copy is Closed!) JTAlert WSJT-X If, as I should, I close DXK on Win11, and bring up DXK on the WIN10, all the contacts are there. JTAlert displays the decoded wsjt-x contacts just fine. However, when I type a callsign in the DX Callbox in WSJT-X, DXKeeper does not perform a lookup of all the previous contacts. I'm stumped? What do I need to do when running the Networked copy of DXK (on Win10 machine), to act like the Win 11 does and perform a lookup of all prior contacts. It should be mentioned that the Win10 copy of DXK and WSJT-X is NOT configured for transmit. I don't even have a transmitter on the Win10 machine, just an SDR. JTAlert seems to be happy with this setup but the missing piece is WSJT-X won't force a Lookup of prior qsos with a call in DXKeeper. Ideas? 73, N0AN Hasan

I would like to "filter" Spotcollector in a way that it will give me the stationes (calls, (Band) Countiers) I need. I am very close to the magic ARRL 3000 mark and would like to "see" only (Unconfirmed) what I need. Thanks, Will K6ND

Has anyone else had my recent experience with multiple "spots" from a single callsign showing up in Spotcollector at the same time. In one instance a Polish station nearly filled the entire Spotcollector screen This just happened again with two or three callsigns showing up, filling the page. I do not think it is a Spotcollector issue per se but likely something from each of the Networks. Weird behavior, never experienced it before. de Paul NF1G

When using "QRZ.com via Pathfinder", which requires only a free QRZ account, lookups are rate-limited to one every 4 seconds. For DXers, this limit is only relevant when importing an ADIF or tab-delimited file with the "Import QSOs" tab's "Query callbook…" option enabled. The fact that Pathfinder downloads and displays QRZ's advertising does make lookups slower than using QRZ's "XML Data" service, which requires a paid subscription. You can specify a secondary callbook to use when the primary callbook is inaccessible or doesn't have an entry for the requested callsign. See https://www.dxlabsuite.com/dxkeeper/Help/Configuration.htm#Callbook%20Tab Step-by-step instructions are here: https://www.dxlabsuite.com/dxlabwiki/CallbookLookup 73, Dave, AA6YQ

QRZ prices are getting out of hand. No choice but to subscribe though. I remember it went from free to 15 to 25 and now 45+. XML is a requirement for reasonable usage of DXLABAS and I have to PRAISE Dave for this program. How he does a LOT more than QRZ and much better support is beyond my comprehension but THAKS DAVE. Outlook LT Gil W0MN Hierro Candente Batir de Repente 44.08226 N 92.51265 W EN34rb -- W0MN EN34rb 44.08226 N 92.51265 W Hierro candente, batir de repente HP Laptop

not sure why but if I type in vk9xu in to DXview it shows their grid as OH29 (heading of 334 degrees) BUT if I click on vk9xu in spotcollector it shows their grid as OC00 (heading of 185 degrees) any ideas? tnx Tim K9US

So I have received a QSL card for a QSO in my DXKeeper log. It is a paper card. On Log QSOs tab I "turn on" the QSL panel. I look down to the second line on the left and see "rcvd" ant to it's right a "down arrow" or carrot. A list of letters appears. I click on the Y letter because I have the card in my hand. Nothing. Nada. Minor disappointment. I look to the right and see "date rcvd" and a field. I start pushing in numbers for today's date. I'm sure my numlk is on. Again, nothin'. Did I manage to somehow lock the form so I can't do anything ham fisted and mess up my log? TIA Bill, NA8M

any problems with the gateway mine seems broken since last N1MM update the N1MM Logger.ini External Broadcast items seems ok 73 Stan N1ZX

Is it possible to have the contact that's been logged in DXKeeper Capture to show in the DXCommander Bandspread listings like the active DX stations from SpotCollector? Perhaps there's something in the DXCommander configuration that permits this? I'm thinking of something like what happens in N1MM+ when a station is logged - the call gets posted in light gray in the N1MM+ band map. It would be nice to see at a glance the calls worked and their frequency in one place like the DXCommander Bandspread. Maybe I'm just missing an option somewhere? 73, Ken KD2KW

Is it possible to add that? I have added a column , but when I scroll thru the dropdown, I dont see RegCode as a choice?

Greatly appreciate the recent update that automated the LoTW and Clublog syncing/updating features. Question: When you import a log, could you create a query window to pop up after the import and ask if you wish to backup the log now? Thanks for the great program.

Following a successful migration to a new Win11 machine, my only issue is that I cannot get Autoscroll to enable automatically. The appropriate tick box is enabled. I have tried rebuilding and deleting the spots database. Autoscroll does change red/blue as expected but will not disable automatically; what next should I check? Many thanks. David VK3BDX

Not too long ago I switched to the new release (2.7.0) of WSJT for FT8. For some reason now, the logged contact for WSJTis not getting relayed and captured by DXK. The contacts are logged in the WSJT log but don't get logged to DXK automatically. Contacts on other modes entered via the capture window or main log page work fine and are logged and i believe that version 2.6 had no problems with getting FT8 QSO logged automatically. My WSJT settings are UDP SERVER = 127.0.0.1 Network service port = 52000 log Automtically is checked UDP port server = 2237 Outgoing interface = Loopback_0 Multicast TTL = 1 Accept UDP requests is checked. Notify on UDP requests is checked. Accepted UDP request restores window is unchecked 2nd UDP server settings are Enable logged contact ADIF broadcast is checked server IP address = 127.0.0.1 Server port number = 12060 What do i need to do to get the WSJT logged QSO's to automatically get loaded to DXK? Is the issue in DXK config or WSJT config? Greg N9GB