开云体育

PROBLEM BETWEEN WSJT AND DXK NOT COMMUNICATING LOGGED QSO

Greg All Messages By This Member #228089 Not too long ago I switched to the new release (2.7.0) of WSJT for FT8. For some reason now, the logged contact for WSJTis not getting relayed and captured by DXK.? The contacts are logged in the WSJT log but don't get logged to DXK automatically.? Contacts on other modes entered via the capture window or main log page work fine and are logged and i believe that version 2.6 had no problems with getting FT8 QSO logged automatically.? ?My WSJT settings are? UDP SERVER = 127.0.0.1 Network service port = 52000 log Automtically is checked UDP port server = 2237 Outgoing interface = Loopback_0 Multicast TTL = 1 Accept UDP requests is checked. Notify on UDP requests is checked. Accepted UDP request restores window is unchecked ? 2nd UDP server settings are Enable logged contact ADIF? broadcast is checked server IP address = 127.0.0.1 Server port number = 12060 ? What do i need to do to get the WSJT logged QSO's to automatically get loaded to DXK? Is the issue in DXK config or WSJT config? ? Greg N9GB
Joe Subich, W4TV All Messages By This Member #228090 What do i need to do to get the WSJT logged QSO's to automatically get loaded to DXK? Is the issue in DXK config or WSJT config? Information on integrating WSJTX with DXLab Suite is here: <> There are two versions ... one "Direct" using SpotCollector: <> and one using JT Alert: <> 73, ... Joe, W4TV On 2025-02-27 12:38 PM, Greg via groups.io wrote: Not too long ago I switched to the new release (2.7.0) of WSJT for FT8. For some reason now, the logged contact for WSJTis not getting relayed and captured by DXK.? The contacts are logged in the WSJT log but don't get logged to DXK automatically.? Contacts on other modes entered via the capture window or main log page work fine and are logged and i believe that version 2.6 had no problems with getting FT8 QSO logged automatically.? ?My WSJT settings are UDP SERVER = 127.0.0.1 Network service port = 52000 log Automtically is checked UDP port server = 2237 Outgoing interface = Loopback_0 Multicast TTL = 1 Accept UDP requests is checked. Notify on UDP requests is checked. Accepted UDP request restores window is unchecked 2nd UDP server settings are Enable logged contact ADIF? broadcast is checked server IP address = 127.0.0.1 Server port number = 12060 What do i need to do to get the WSJT logged QSO's to automatically get loaded to DXK? Is the issue in DXK config or WSJT config? Greg N9GB
Dave w6de All Messages By This Member #228093 开云体育 In additions to Joe’s guidance, in WSJTX, Settings, Reporting tab, Logging panel, is “Prompt me to log QSO” checked? ? 73, Dave, w6de ? toggle quoted message Show quoted text From: [email protected] <[email protected]> On Behalf Of Greg via groups.io Sent: 27 February, 2025 17:39 To: [email protected] Subject: [DXLab] PROBLEM BETWEEN WSJT AND DXK NOT COMMUNICATING LOGGED QSO ? Not too long ago I switched to the new release (2.7.0) of WSJT for FT8. For some reason now, the logged contact for WSJTis not getting relayed and captured by DXK.? The contacts are logged in the WSJT log but don't get logged to DXK automatically.? Contacts on other modes entered via the capture window or main log page work fine and are logged and i believe that version 2.6 had no problems with getting FT8 QSO logged automatically.? ?My WSJT settings are? UDP SERVER = 127.0.0.1 Network service port = 52000 log Automtically is checked UDP port server = 2237 Outgoing interface = Loopback_0 Multicast TTL = 1 Accept UDP requests is checked. Notify on UDP requests is checked. Accepted UDP request restores window is unchecked ? 2nd UDP server settings are Enable logged contact ADIF? broadcast is checked server IP address = 127.0.0.1 Server port number = 12060 ? What do i need to do to get the WSJT logged QSO's to automatically get loaded to DXK? Is the issue in DXK config or WSJT config? ? Greg N9GB

Previous Topic Next Topic