Re: PROBLEM BETWEEN WSJT AND DXK NOT COMMUNICATING LOGGED QSO
|
In additions to Joe’s guidance,
in WSJTX, Settings,
Reporting tab, Logging panel, is “Prompt me to log QSO” checked?
?
73,
Dave, w6de
?
toggle quoted message
Show quoted text
From: [email protected]
<[email protected]> On Behalf Of Greg via groups.io
Sent: 27 February, 2025 17:39
To: [email protected]
Subject: [DXLab] PROBLEM BETWEEN WSJT AND DXK NOT COMMUNICATING LOGGED QSO
?
Not too long ago I switched to the new release (2.7.0) of WSJT for FT8. For some reason now, the logged contact for WSJTis not getting relayed and captured by DXK.? The contacts are logged in the WSJT log but don't get logged to DXK automatically.?
Contacts on other modes entered via the capture window or main log page work fine and are logged and i believe that version 2.6 had no problems with getting FT8 QSO logged automatically.? ?My WSJT settings are?
Network service port = 52000
log Automtically is checked
Outgoing interface = Loopback_0
Accept UDP requests is checked.
Notify on UDP requests is checked.
Accepted UDP request restores window is unchecked
2nd UDP server settings are
Enable logged contact ADIF? broadcast is checked
server IP address = 127.0.0.1
Server port number = 12060
What do i need to do to get the WSJT logged QSO's to automatically get loaded to DXK? Is the issue in DXK config or WSJT config?
|
