What do i need to do to get the WSJT logged QSO's to automatically
get loaded to DXK? Is the issue in DXK config or WSJT config?
Information on integrating WSJTX with DXLab Suite is here:
<>
There are two versions ... one "Direct" using SpotCollector:
<>
and one using JT Alert:
<>
73,
... Joe, W4TV
On 2025-02-27 12:38 PM, Greg via groups.io wrote:
Not too long ago I switched to the new release (2.7.0) of WSJT for FT8. For some reason now, the logged contact for WSJTis not getting relayed and captured by DXK.? The contacts are logged in the WSJT log but don't get logged to DXK automatically.? Contacts on other modes entered via the capture window or main log page work fine and are logged and i believe that version 2.6 had no problems with getting FT8 QSO logged automatically.? ?My WSJT settings are
UDP SERVER = 127.0.0.1
Network service port = 52000
log Automtically is checked
UDP port server = 2237
Outgoing interface = Loopback_0
Multicast TTL = 1
Accept UDP requests is checked.
Notify on UDP requests is checked.
Accepted UDP request restores window is unchecked
2nd UDP server settings are
Enable logged contact ADIF? broadcast is checked
server IP address = 127.0.0.1
Server port number = 12060
What do i need to do to get the WSJT logged QSO's to automatically get loaded to DXK? Is the issue in DXK config or WSJT config?
Greg N9GB
