开云体育

Bruce, many thanks for reporting this behavior, as it exposed a vulnerability in the way Pathfinder was searching the information on the web page displayed by QRZ.com. I created a new version of

Because N1MM Logger has to switch the output from left to right in playback (for SO2R) and it switches the input from mic (for SSB transmit) to Line (for recording QSOs) between TX and RX

Any computer you can buy today new will have more than enough power and even without dual core. N1MM works fine for CW on W7 but if you want to send SSB sounds you MUST use the default sound card.

I an thinking about getting a new desktop, as well as the netbook. I will be running mostly ham radio programs (dxlabs, N1MM logger, Multipsk, Airmail) but will also be the general all around

This weekend I ran the QS1R SDR receiver with Skimmer Server software from VE3NEA. This infrastructure can monitor CW QSOs on seven bands at once, 192khz on each band. Using the most rigorous

Enter "*NP" in the filter box, and click "Call". ~Iain / N6ML

How best would I go about searching the spot database for a specific suffix, such as 'NP'? Can this be done from within SC? 73 Art

Page 147 of the IC-7000 manual shows a 1B command that can set and read the repeater tone frequency, so it may be possible to configure one or more of Commander's user-defined command buttons as

Can Stan use the CAT commands for that rig with Commander's User Defined buttons to select the rig's memories? If so and there are multiple repeaters then he could do branched commands to cycle

Hi Dave, I have just uploaded an updated LoTW user list database, now it is at 29/11/2009. 73, Renzo I6KZR MITTO TIBI NAVEM PRORA

Hahaha! No, I don't have them all here, but they're all available on the groups web page at yahoogroups.com ! Earl KD5XB -- Earl Needham http://groups.yahoo.com/group/cw_bugs Quoting from the

Tom, I have a Kenwood Ts-2000 and ran into a similiar situation a few weeks ago. It turned out that the freq don't update when the radio is in Memory mode. I had recently programmed in all the

AD1L's QRZ.com page contains HTML that puts Pathfinder's "extract info from QRZ.com" code into an infinite loop. I'm looking for a way to detect this that will likely survive downstream QRZ.com format

What sort of transceiver are you using, Tom? If there's an external interface between your transceiver and your PC, how is this interface powered? If the power comes from a serial port modem control

Hello to all: ? My Commander 8.0.5.? LATEST UP GRADES..Stopped updating and passing FREQ info to DXKeeper ?automatically .. ? Have not operated since last up-grade until this

Goood grief! You keep all these messages? There have to be a million and three by now. Danny Douglas N7DC ex WN5QMX ET2US WA5UKR ET3USA SV0WPP VS6DD N7DC/YV5 G5CTB All 2 years or more (except

And to you, Dave, for answering all those questions and graciously accepting all those critiques and suggestions! -- Peter Laws | N5UWY | plaws plaws net | Travel by Train!

Thanks, Dave. I wasn't being critical at all. I just wanted to make sure that my problem was being understood.

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of g4gcl Sent: Sunday, November 29, 2009 3:54 PM To: dxlab@... Subject: [dxlab] Re: DX View