开云体育

Page 147 of the IC-7000 manual shows a 1B command that can set and read the repeater tone frequency, so it may be possible to configure one or more of Commander's user-defined command buttons as

Can Stan use the CAT commands for that rig with Commander's User Defined buttons to select the rig's memories? If so and there are multiple repeaters then he could do branched commands to cycle

Hi Dave, I have just uploaded an updated LoTW user list database, now it is at 29/11/2009. 73, Renzo I6KZR MITTO TIBI NAVEM PRORA

Hahaha! No, I don't have them all here, but they're all available on the groups web page at yahoogroups.com ! Earl KD5XB -- Earl Needham http://groups.yahoo.com/group/cw_bugs Quoting from the

Tom, I have a Kenwood Ts-2000 and ran into a similiar situation a few weeks ago. It turned out that the freq don't update when the radio is in Memory mode. I had recently programmed in all the

AD1L's QRZ.com page contains HTML that puts Pathfinder's "extract info from QRZ.com" code into an infinite loop. I'm looking for a way to detect this that will likely survive downstream QRZ.com format

What sort of transceiver are you using, Tom? If there's an external interface between your transceiver and your PC, how is this interface powered? If the power comes from a serial port modem control

Hello to all: ? My Commander 8.0.5.? LATEST UP GRADES..Stopped updating and passing FREQ info to DXKeeper ?automatically .. ? Have not operated since last up-grade until this

Goood grief! You keep all these messages? There have to be a million and three by now. Danny Douglas N7DC ex WN5QMX ET2US WA5UKR ET3USA SV0WPP VS6DD N7DC/YV5 G5CTB All 2 years or more (except

And to you, Dave, for answering all those questions and graciously accepting all those critiques and suggestions! -- Peter Laws | N5UWY | plaws plaws net | Travel by Train!

Thanks, Dave. I wasn't being critical at all. I just wanted to make sure that my problem was being understood.

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of g4gcl Sent: Sunday, November 29, 2009 3:54 PM To: dxlab@... Subject: [dxlab] Re: DX View

How far we've come! The following is from Mar 19, 2001...

Hello Dave. Thank you very much for taking the time to write such an interesting and informative reply to my question. As I mentioned in my previous reply I'm not interested in chasing DX, & never

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of John Cadick Sent: Sunday, November 29, 2009 3:43 PM To: dxlab@... Subject: RE: [dxlab]

I would like to thank Rich W3ZJ for taking the initiative to create this group, and for his efforts over the past 8 years to maintain an open, constructive, and friendly forum. I would also like to

<<<<However, I have now started using the backup that is an integral part of Windows 7 professional and find it far more reliable than Ghost. Also, now every file on my system has a list of previous

Yes! 73, Dave, AA6YQ

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of hambeamtower Sent: Sunday, November 29, 2009 12:59 PM To: dxlab@... Subject: [dxlab] CBA